本文選題：制造業轉型升級 + 生產性服務業　； 參考：《河北大學》2017年碩士論文

【摘要】：當前我國加速實施的以“三去一降一補”為重點的供給側結構性改革,為艱難的制造業轉型升級提供了新的發展思路,而且制造業與生產性服務業融合已經成為當今現代制造業發展的主流趨勢。目前我國正在以加快發展生產性服務業作為制造業轉型升級的新引擎和重要抓手,來推動我國制造業由低端向中高端發展,進而實現由制造業大國向制造業強國的轉變。河北省作為全國去庫存、去產能的重點大戶,近年來數量眾多的傳統制造業中,絕大多數行業處于整體衰退期,制造業轉型升級任務異常艱巨,然而全省生產性服務業發展總體水平較低且相對滯后。因此,河北省如何通過加快發展生產性服務業,助推全省沉重的制造業身軀實現調轉和奔跑跨越,是一個具有挑戰性的產業命題,值得深入探究。本文研究的核心問題是制造業轉型升級視角下的河北省生產性服務業發展問題,其研究的主要內容和結論包括:一是對近幾年來全省生產性服務業和制造業變動情況進行了描述性分析,以了解兩大行業的發展現狀;二是基于前述兩大行業的各自研究范疇及其相互作用機理,構建了綜合評價指標體系,并運用熵值法和耦合協調度模型,測算了二者之間的協調發展程度,結果表明生產性服務業發展相對滯后;三是定性分析了制約生產性服務業發展的主要因素,并采用灰色關聯法對河北省該行業影響因素進行了計量分析,實證結果顯示,就整個行業層面而言,影響程度由大到小的因素依次為城鎮化水平、集聚水平、勞動力投入、工業化程度、經濟外向度、產業融合度和物質資本投入,就六個細分行業層面而言,各個因素的影響程度存在著差異;四是依據實證分析結果,并結合河北省存在的現實問題,從制造業轉型升級視角上,提出了加速城鎮化以拓展生產性服務業空間、推動該行業發展的集聚化、積極引進和培養專業技能人才、促進前述兩大行業的深度融合、加快該行業的內外開放合作以及對不同子行業實施差別化發展政策等策略建議。
[Abstract]:At present, the supply-side structural reform accelerated in our country, which focuses on "three go, one drop and one supplement", has provided a new way of development for the difficult transformation and upgrading of the manufacturing industry. And the integration of manufacturing and producer services has become the mainstream trend of modern manufacturing development. At present, our country is developing producer service industry as the new engine and important hand of manufacturing industry transformation and upgrading, to promote the development of manufacturing industry from low end to middle and high end, and then to realize the transition from big manufacturing country to powerful manufacturing country. Hebei Province is the key household to go to inventory and capacity in the whole country. In recent years, among the large number of traditional manufacturing industries, the vast majority of industries are in an overall recession, and the task of transforming and upgrading manufacturing industries is extremely arduous. However, the overall level of producer services development in the province is relatively low and lagging behind. Therefore, how to speed up the development of producer services in Hebei Province and promote the province's heavy manufacturing industry to realize the transfer and run across is a challenging industry proposition, which is worthy of further exploration. The core problem of this paper is the development of producer services in Hebei Province from the perspective of manufacturing transformation and upgrading. The main contents and conclusions of the study are as follows: first, the changes of producer service industry and manufacturing industry in the province in recent years are analyzed in a descriptive way to understand the development status of the two major industries; Secondly, based on the respective research categories and their interaction mechanism of the two industries mentioned above, a comprehensive evaluation index system is constructed, and the degree of coordinated development between the two industries is calculated by using entropy method and coupling coordination degree model. The results show that the development of producer services is relatively lagging behind. Thirdly, the main factors restricting the development of producer services are analyzed qualitatively, and the influencing factors of Hebei province are analyzed by grey correlation method. The empirical results show that, As far as the whole industry level is concerned, the factors that influence the degree from big to small in turn are urbanization level, agglomeration level, labor force input, industrialization degree, economic extroversion, industry finance degree and material capital investment. In terms of six subdivision industry levels, there are differences in the degree of influence of each factor. Fourth, according to the empirical analysis results, and combined with the existing problems in Hebei Province, from the perspective of manufacturing transformation and upgrading, It is proposed to accelerate urbanization in order to expand the space of producer services, to promote the agglomeration of the development of the industry, to actively introduce and train professional and skilled personnel, and to promote the deep integration of the two industries. To speed up the internal and external cooperation of the industry and to implement differentiated development policies for different sub-industries and other strategic recommendations.
【學位授予單位】：河北大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F719;F427

【參考文獻】

相關期刊論文 前10條

1 賈榮言;莊煒瑋;李榮平;;河北省工業企業研發投入產出績效評價研究[J];河北科技大學學報(社會科學版);2016年04期

2 武義青;陳巖;;京津冀制造業競爭力實證研究——基于三次經濟普查數據的分析[J];河北經貿大學學報;2016年06期

3 王興鵬;桂莉;;京津冀協同背景下河北省生產性服務業發展路徑研究[J];商業經濟研究;2016年09期

4 李志強;吳心怡;;產業協調發展對區域經濟的影響研究——基于制造業與生產性服務業面板數據模型的分析[J];商業研究;2016年04期

5 張捷;陳田;;產業融合對制造業績效影響的實證研究——制造業與服務業雙向融合的視角[J];產經評論;2016年02期

6 胡晶;;生產性服務業發展推動制造業轉型升級問題探討[J];新疆社會科學;2016年01期

7 康玉林;王松;;河北省生產性服務業發展現狀、問題、成因及路徑選擇[J];統計與管理;2015年12期

8 畢斗斗;方遠平;Bryson John;謝蔓;唐瑤;;中國生產性服務業發展水平的時空差異及其影響因素——基于省域的空間計量分析[J];經濟地理;2015年08期

9 吳昌南;蘇婷;;生產性服務業促進制造業發展的實證研究[J];統計與決策;2015年09期

10 楚明欽;;上海生產性服務業與裝備制造業融合程度研究——基于長三角及全國投入產出表的比較分析[J];上海經濟研究;2015年02期

相關博士學位論文 前1條

1 楊仁發;生產性服務業發展、制造業競爭力與產業融合[D];南開大學;2013年

相關碩士學位論文 前1條

1 張佳紅;港口物流推動地區經濟增長作用分析[D];河北師范大學;2013年

，

本文編號：1846737