本文選題：熊果酸 + 脂肪乳�。� 參考：《中國醫院藥學雜志》2016年18期

【摘要】：目的:制備熊果酸脂肪乳注射液,并對其理化性質進行評價。方法:采用高壓均質法制備熊果酸脂肪乳注射液,考察脂肪乳的粒徑分布、Zeta電位和微觀形態,并初步研究熊果酸脂肪乳的穩定性。結果:熊果酸脂肪乳注射液的平均粒徑為(203.6±37.1)nm,Zeta電位為(-36.5±3.6)mV;透射電鏡顯示脂肪乳注射液粒徑均一,呈球狀分布。穩定性研究結果表明,熊果酸脂肪乳在25℃/60%條件下放置6個月內穩定。結論:高壓均質法制備熊果酸脂肪乳注射液工藝簡單易行,有望應用于工業化生產。
[Abstract]:Objective: to prepare ursolic acid fat emulsion injection and evaluate its physical and chemical properties. Methods: ursolic acid fat emulsion injection was prepared by high pressure homogenization method. The particle size distribution, Zeta potential and micromorphology of the fat emulsion were investigated, and the stability of ursolic acid fat emulsion was preliminarily studied. Results: the average particle size of ursolic acid fat emulsion injection was 203.6 鹵37.1nmGV, the Zeta potential was -36.5 鹵3.6mV.The transmission electron microscope showed that the size of fat emulsion injection was uniform and spherical distribution. The results showed that ursolic acid fat emulsion was stable at 25 鈩，

本文編號：1973178