本文關鍵詞：酮洛芬固體分散體的制備及其體外溶出度研究　出處：《中國藥業》2016年01期 　論文類型：期刊論文

  更多相關文章： 酮洛芬 固體分散體 體外溶出度 聚乙二醇

【摘要】：目的將酮洛芬制成固體分散體,考察其體外溶出特性。方法以聚乙二醇(PEG)為載體,用熔融法制備固體分散體,用正交試驗篩選最優處方和制備工藝,X射線衍射法對其進行表征,并對固體分散體進行體外溶出度研究。結果固體分散體最優處方和工藝為,PEG 6000為載體,藥物與載體比例為1∶5,制備溫度為100℃,制備時間為30 min。制成的固體分散體在p H=7.6的介質中釋放速率最快,45 min時溶出百分率為94.5%。結論酮洛芬固體分散體可顯著提高酮洛芬的體外溶出速率。
[Abstract]:Objective To prepare the solid dispersion by using polyethylene glycol ( PEG ) as carrier and to prepare the solid dispersion by melt method . The optimal prescription and the preparation technology were selected by orthogonal test . The optimal prescription and the process were as follows : PEG 6000 as carrier , the ratio of drug to carrier was 1 鈭，

本文編號：1369989