【摘要】：本研究擬開發下頜螺旋軸軌跡的三維顯示和分析系統,用于定量分析下頜的三維空間運動。采用6自由度的超聲下頜運動記錄儀測量下頜運動;利用計算機斷層掃描圖像重建上頜、下頜顱骨的三維數字模型;通過結構光三維掃描儀將顱骨的三維數字模型校準至下頜運動數據的坐標系�；赩isualization ToolKit和Open Scene Graphics Library開發了本系統,利用下頜運動數據計算連續變換矩陣來仿真下頜運動,通過特征值方法計算下頜的螺旋軸軌跡,并實時顯示螺旋軸軌跡與下頜的空間位置關系。本系統可以計算并輸出下頜螺旋軸的參數(旋轉、平移、方向、位置),用于精確評價下頜的三維空間運動。因此,本系統為采用螺旋軸理論研究下頜的三維空間運動奠定了一定的理論依據和實驗基礎。
[Abstract]:In this study, a three-dimensional display and analysis system of mandibular spiral axis trajectory is developed to quantitatively analyze the three-dimensional motion of the mandible. The mandibular movement was measured with a 6-DOF ultrasonic motion recorder, and the three-dimensional digital model of maxillary and mandibular skull was reconstructed by computed tomography (CT) images. The three-dimensional digital model of skull was calibrated to the coordinate system of mandibular motion data by structured light 3D scanner. Based on Visualization ToolKit and Open scene Graphics Library, the system is developed. The mandibular motion is simulated by calculating the continuous transformation matrix with the mandibular motion data, and the trajectory of the spiral axis of the mandible is calculated by the eigenvalue method. The relationship between the orbit of spiral axis and the space position of mandible was displayed in real time. The system can calculate and output the parameters (rotation, translation, direction, position) of the mandibular helical axis, and can be used to accurately evaluate the three-dimensional motion of the mandible. Therefore, the system provides a theoretical and experimental basis for the study of the three-dimensional movement of the mandible by using the helical axis theory.
【作者單位】： 北京大學口腔醫學院·口腔醫院;河北醫科大學第二醫院;中國科學院軟件研究所;
【基金】：河北省科技支撐計劃項目資助(14277759D)
【分類號】：R318.01

【參考文獻】

相關期刊論文 前4條

1 陳磊;張豪;馮海蘭;張鳳軍;;正常受試者單側咀嚼運動中的鉭接觸模式[J];北京大學學報(醫學版);2009年01期

2 侯振剛,馮海蘭,鄭卓肇,趙燕平;髁突運動中心大張口軌跡與關節窩形態的關系及臨床應用探討[J];中華口腔醫學雜志;2004年01期

3 樊志強;徐永清;李晶;劉力;朱躍良;陳斌;姜楠;丁薇;;正常腕關節運動時腕中關節運動學在體研究[J];中國臨床解剖學雜志;2009年01期

4 王海明;蔣暉;趙衛東;程勇泉;陳建庭;;脊柱三維運動和畸形描述方法的比較研究[J];中國臨床解剖學雜志;2013年03期

【共引文獻】

相關期刊論文 前5條

1 李建霞;鄧鋒;宋錦t，

本文編號：2121186