本文選題：提花機 + 裝飾布�。� 參考：《棉紡織技術》2004年10期

【摘要】：大提花裝飾布采用CAD系統來設計花形,在大批量生產前要進行織物風格的小樣試驗,以確保用戶滿意。生產中漿紗工序要確保質量,卷繞張力略偏大掌握,重點是增加耐磨性;織造工序布邊組織要慎選,采用托布板來減小織口跳動,采用專用軟件進行浮長的編輯工作,并改進了接經方法,加強了接經技術培訓,減少了斷經,使織造效率達到90%。
[Abstract]:The CAD system is used to design the flower shape. Before the mass production, the fabric style test should be carried out to ensure the satisfaction of the users. The production in the pulp yarn should ensure the quality, the winding tension is slightly mastered, the emphasis is to increase the wear resistance; the fabric edge organization of the weaving process should be carefully selected and the cloth plate is used to reduce the beating of the fabric. Software is used to carry out floats long editing work, and improves the connection method, strengthens the training of receiving technology, reduces the broken warp, and makes weaving efficiency reach 90%.

【作者單位】： 江蘇省無錫慶豐股份有限公司 江蘇省無錫慶豐股份有限公司
【分類號】：TS103.133.3

【相似文獻】

相關期刊論文 前10條

1 吳奇山;;邊撐裝置的改造[J];棉紡織技術;1987年06期

2 張軍勝;1989年春季廣交會紡織新產品展銷情況匯報[J];紡織導報;1989年13期

3 王崇德;不斷提高企業的經濟效益和社會效益[J];w，

本文編號：1811385