本文選題：感性工學 + 整體櫥柜　； 參考：《中南林業科技大學》2016年碩士論文

【摘要】：本文以定制類家具快速發展為背景,以現代整體櫥柜為研究對象,以產品視覺形態為切入點展開研究,引入感性工學的研究方法,將整體櫥柜的感性意象量化,探尋意象語意與產品視覺形態之間的關系,為整體櫥柜設計提供理論支持。依據視覺形態原理及基本組成,提出了整體櫥柜6個代表性的視覺形態要素：拉手形態、門板裝飾形態、體量形態、空間組織形態、主要色彩以及主要材質,并細分成20個類目。依據感性工學的基本原理及方法,進行感性評價模型構建、整體櫥柜視覺形態空間構建、整體櫥柜意象語意空間構建、意象語意與整體櫥柜視覺形態要素的關聯性構建,明確了整體櫥柜定性及定量評價原則及方法。利用聚類分析法、因子分析法篩選出代表性整體櫥柜樣本20個,代表性意象詞匯對5對,包括：小氣的-大氣的、靈活的-穩重的、裝飾的-實用的、無質感的-質感的、繁復的-簡約的,分別對應造型、情感、效用、親和、裝飾5個公因子。利用語意差異法進行感性評價實驗,從感性評價分值可見：男性與女性的評價值具有相同趨勢,女性評價分值普遍稍低于男性,更加關注產品各細節；專業組與非專業組評價值存在顯著差異,專業組評價分值明顯低于非專業組,具有嚴格的評價標準。利用數量化理論I類構建意象語意與視覺形態要素間的聯系,明確了在各公因子下需要主要考量的視覺形態分別為：體量形態、主要色彩、空間組織形態、門板裝飾形態、門板裝飾形態。利用SPSS軟件進行多元回歸分析,建立5個公因子下的感性預測模型,模型檢驗結果均良好。利用R軟件對5個預測模型進行優化,得到在各個公因子或多個公因子達到最優感性意象時產品視覺形態要素的組合方式,并提出優化建議。再次利用多元回歸法建立總體感性評價預測模型,發現5個公因子對整體評價的影響從大到小依此為：親和因子、效用因子、造型因子、情感因子、裝飾因子。對總體預測模型進行優化,得到整體櫥柜達到總體最優意象感受時產品視覺形態要素組合方式,可作為整體櫥柜相關企業及設計師進行設計方案篩選時的理論依據。
[Abstract]:This paper takes the rapid development of custom-made furniture as the background, takes the modern whole cabinet as the research object, takes the product visual form as the breakthrough point, introduces the perceptual engineering research method, quantifies the perceptual image of the whole cabinet. To explore the relationship between image meaning and product visual form, to provide theoretical support for the overall cabinet design. According to the principle and basic composition of visual form, this paper puts forward six typical visual form elements of the whole cabinet: handle shape, door decoration form, volume form, space organization form, main color and main material. And subdivided into 20 categories. According to the basic principles and methods of perceptual engineering, the paper constructs the perceptual evaluation model, the space of the visual form of the whole cabinet, the semantic space of the image of the whole cabinet, and the relationship between the image meaning and the elements of the visual form of the whole cabinet. Clear overall cabinet qualitative and quantitative evaluation principles and methods. By using cluster analysis and factor analysis, 20 representative whole cabinet samples were selected, and 5 pairs of representative image words were selected, including: stingy-atmospheric, flexible-stable, decorative-practical, non-textured, Complex-simple, respectively corresponding to modeling, emotion, utility, affinity, decoration 5 common factors. Using semantic difference method to carry on the perceptual evaluation experiment, it can be seen from the perceptual evaluation score: male and female evaluation value has the same trend, female evaluation value is generally slightly lower than male, pay more attention to product details; There is a significant difference between the professional group and the non-professional group, the evaluation score of the professional group is obviously lower than that of the non-professional group, and it has strict evaluation criteria. By using the quantitative theory I to construct the relationship between image meaning and visual form elements, it is clear that the main visual forms that need to be considered under each common factor are: volume shape, main color, spatial organization form, door decoration form. Door panel decoration form. The multivariate regression analysis with SPSS software is used to establish the perceptual prediction model under five common factors, and the results of the model test are all good. Five prediction models were optimized by using R software, and the combination mode of product visual form elements was obtained when each common factor or multiple common factors reached the optimal perceptual image, and some optimization suggestions were put forward. The prediction model of overall perceptual evaluation was established by multivariate regression method, and it was found that the influence of five common factors on the whole evaluation was from large to small: affinity factor, utility factor, shape factor, emotion factor and decoration factor. The overall prediction model was optimized and the combination mode of product visual form elements when the whole cabinet reached the overall optimal image perception was obtained. It can be used as the theoretical basis for the whole cabinet related enterprises and designers to carry out the design scheme screening.
【學位授予單位】：中南林業科技大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TS972.26

【相似文獻】

相關期刊論文 前10條

1 楊琦;聶桂平;楊正寅;;基于感性工學理論的攜帶式水壺形態研究[J];東華大學學報(自然科學版);2010年04期

2 李靜;關惠元;;基于感性工學的木質壁掛鏡整體形態研究[J];家具與室內裝飾;2014年05期

3 王瑩;陳雁;;利用感性工學原理設計學生裝[J];紡織學報;2007年03期

4 徐偉峰,付永民;利用感性工學原理設計產品造型[J];焦作工學院學報(自然科學版);2003年05期

5 邢艷芳;;應用感性工學理論實施產品造型設計方法的研究[J];廣西輕工業;2011年09期

6 董向芳;王紅;;基于感性工學的服裝企業產品研發流程[J];現代裝飾(理論);2012年10期

7 湛群;黃晨;杜兆芳;;基于感性工學的陶瓷產品質感設計方法研究[J];人類工效學;2013年01期

8 劉亞平;;基于感性工學的女辦公裝設計流程優化[J];紡織科技進展;2011年02期

9 楊超翔;劉淼;章彰;;基于感性工學的OLED燈具設計評價方法研究[J];設計;2014年06期

10 周美玉;李倩;;神經網絡在產品感性設計中的應用[J];東華大學學報(自然科學版);2011年04期

相關會議論文 前2條

1 種道玉;曲延瑞;;運用感性工學進行愉悅設計[A];2006年中國機械工程學會年會暨中國工程院機械與運載工程學部首屆年會論文集[C];2006年

2 廖婉茹;王，

本文編號：1796159