【摘要】：本論文從提高齒科用復合樹脂基體的性能入手,側重于新型樹脂基體的設計合成及性能研究,通過設計并合成兩種新型高性能低粘度的復合樹脂基體,并對其結構、性能和毒性進行了詳細研究。1.利用羥醛縮合反應,合成四甲基雙酚F化合物,并將該產物與環氧氯丙烷反應,得到四甲基雙酚F型環氧樹脂。繼而將該環氧樹脂與丙烯酸反應,合成新型復合樹脂單體—四甲基雙酚F型丙烯酸酯,研究其結構和性能的關系,對其生物毒性進行評價。并與Bis-GMA按不同比例混合,篩選最佳配比復合樹脂體系。2.設計并合成了一種含三氟甲基的新型聚合物——間三氟甲基苯基型丙烯酸酯,研究其結構和性能的關系,對其生物毒性進行評價。并與Bis-GMA按不同比例混合,篩選最佳配比復合樹脂體系。3.分析了不同濃度的TEGDMA對兩種新型復合樹脂基質性能和毒性的影響,篩選出最佳配方。新型復合樹脂基質有望成為替代Bis-GMA的備選基質。
[Abstract]:In this paper, we focus on the design, synthesis and study of the new resin matrix. Through the design and synthesis of two new high performance and low viscosity composite resin matrix, and the structure of the composite resin matrix, the paper begins with the improvement of the performance of the composite resin matrix used in dentistry, focusing on the design, synthesis and properties of the new resin matrix. The performance and toxicity were studied in detail. Tetramethyl bisphenol F compound was synthesized by the condensation of hydroxyl aldehyde and reacted with epichlorohydrin to obtain tetramethyl bisphenol F type epoxy resin. A new composite resin monomer, tetramethyl bisphenol F type acrylate, was synthesized by the reaction of the epoxy resin with acrylic acid. The relationship between the structure and properties of the resin was studied and its biological toxicity was evaluated. The optimum compound resin system. 2. 2 was mixed with Bis-GMA in different proportion. A novel polymer containing trifluoromethyl-m-trifluoromethyl phenyl acrylate was designed and synthesized. The relationship between its structure and properties was studied and its biological toxicity was evaluated. The optimum compound resin system. 3. 3 was mixed with Bis-GMA in different proportion. The effects of different concentrations of TEGDMA on the properties and toxicity of two new composite resins were analyzed. The new composite resin matrix is expected to be a substitute for Bis-GMA.
【學位授予單位】：吉林大學
【學位級別】：博士
【學位授予年份】：2017
【分類號】：TQ320.7

【相似文獻】

相關期刊論文 前10條

1 張玉格,王補森,趙書燕,何炳林;復合樹脂及其交換動力學[J];高等學校化學學報;1992年03期

2 鄒毅;;水膨脹性聚氯乙烯復合樹脂開發成功[J];精細與專用化學品;1985年20期

3 于欣毅;謝賀明;蔣繼英;;鈦微粉填料牙科復合樹脂[J];粘合劑;1988年02期

4 余卓深;黃小明;韓玉芳;洪法廉;楊學欽;李友誼;;高強度復合樹脂研究[J];廣州化工;1988年02期

5 ;使皮革持久防霉[J];西部皮革;1990年03期

6 黃文強,楊新林,李晨曦,何炳林;聚苯乙烯磺酸樹脂與三氯化鋁復合樹脂的合成及其對酯化反應的催化性能[J];離子交換與吸附;1997年02期

7 徐尚治;;復合樹脂補牙材料性能測試和應用[J];熱固性樹脂;1991年02期

8 王沛喜;;光固化型新型復合樹脂[J];中國膠粘劑;2006年07期

9 廖德(艸Q，

本文編號：2148446