【摘要】：針對聚苯砜(PPSU)樹脂生產流程中純化困難的特點,設計出一種沉析純化方法,即PPSU在聚合完成后以粉末態析出,再經過純化過程得到高純度的PPSU樹脂。對沉析純化法和傳統粉碎純化法制備的兩種PPSU樹脂進行了灰分含量、特性黏度、粒徑、熱穩定性等系列對比測試,同時比較了兩種PPSU薄膜的透光率、霧度和拉伸性能。結果表明,沉析法大幅提高了PPSU的純化效果,其制備的PPSU粉體粒徑更小,產物灰分含量更低;沉析法有利于保證PPSU樹脂分子量和分子鏈結構的完整,其特性黏度比粉碎法PPSU提高了34.5%;由于PPSU樹脂分子結構和組成未變,兩種方法制備的PPSU樹脂熱穩定性基本一致;沉析法制備的PPSU薄膜的透光率更高、霧度更低,拉伸性能更好。
[Abstract]:In view of the difficulty in purification of polyphenylsulfone (PPSU) resin, a precipitation purification method was designed, in which PPSU was precipitated in powder state after polymerization and then purified to obtain high purity PPSU resin. The ash content, intrinsic viscosity, particle size and thermal stability of the two kinds of PPSU resins prepared by precipitation purification method and traditional comminution purification method were compared. The transmittance, haze and tensile properties of the two kinds of PPSU films were also compared. The results showed that the purification effect of PPSU was greatly improved by precipitation, and the particle size of PPSU powder was smaller and the ash content of the product was lower. Precipitation method is beneficial to ensure the integrity of molecular weight and molecular chain structure of PPSU resin, and its intrinsic viscosity is 34.555% higher than that of comminuted PPSU. Because the molecular structure and composition of PPSU resin have not changed, the thermal stability of PPSU resin prepared by the two methods is basically the same. The PPSU films prepared by precipitation method have higher transmittance, lower haze and better tensile properties.
【作者單位】： 中橡集團炭黑工業研究設計院;四川理工學院材料科學與工程學院;
【分類號】：TQ326.55

【參考文獻】

相關期刊論文 前6條

1 張友捷;鮮一;伍勇;;聚亞苯基砜樹脂在氮氣和氧氣氛圍中的熱分解動力學分析[J];四川化工;2015年06期

2 陳驍;趙建青;袁彥超;劉述梅;曹明;阮文紅;章明秋;;砜聚合物特種工程塑料的合成、性能與應用[J];廣東化工;2013年18期

3 胡任之;;聚砜樹脂的發展動態[J];上�；�;2013年04期

4 周建龍;張?zhí)祢?邢慧慧;;熔融法紡制聚苯砜纖維的探索研究[J];北京服裝學院學報(自然科學版);2011年02期

5 吳建國;李蘭軍;郭洪濤;;聚砜及其復合材料研究進展[J];塑料工業;2009年07期

6 劉金剛;范琳;楊士勇;;特種工程塑料市場與應用[J];合成樹脂及塑料;2005年06期

【相似文獻】

相關期刊論文 前10條

1 ;可溶性聚苯的研究[J];塑料工業;1975年04期

2 ;聚苯撐發展概況[J];涂料工業;1976年01期

3 ;聚苯砜醚應用簡介[J];工程塑料應用;1979年04期

4 彭遠東;;國外聚苯撐合成方法的進展[J];云南化工技術;1982年01期

5 柳方;又一種新型高分子化合物——聚苯d愌鮗J];化學世界;1965年04期

6 ;聚苯d愂髦芯，

本文編號：2342610