【摘要】：采用檸檬酸溶膠-凝膠法制得鋇鐵氧體磁性粉末,借助熱質量分析(TGA)、紅外光譜(FT-IR)、X線衍射(XRD)及掃描電鏡(SEM)測試手段研究了不同檸檬酸添加量對煅燒產物晶型的影響。結果表明:當檸檬酸與金屬硝酸鹽摩爾配比n(CA)/n(MN)≤1.2時,鋇鐵氧體晶相為W型,當n(CA)/n(MN)=2時,晶相轉變?yōu)镸型;隨著檸檬酸量的增加,燃燒產物的晶化溫度升高;過量檸檬酸添加改變了中間產物Fe的存在形式,促使γ-Fe_2O_3轉化為熱穩定性好的α-Fe_2O_3,進而使得W型鋇鐵氧體的成型溫度升高,出現M晶型鋇鐵氧體。
[Abstract]:Barium ferrite magnetic powder was prepared by citric acid sol-gel method. The effect of citric acid addition on the crystal form of calcined product was studied by means of (TGA), infrared (FT-IR) X-ray diffraction (XRD) and SEM (SEM). The results show that when the molar ratio of citric acid to nitrate n (CA) / n (MN) 鈮，

本文編號：2240854