【摘要】：基于水解沉淀法,通過添加造孔劑制備出了多孔鐵碳合金.以Fe Cl3·6H2O為主要原料,淀粉作造孔劑,向制得的膠體中加入不同配比的淀粉,經過濾、烘干、煅燒,再在650、700、750和800℃的溫度條件下用氫氣還原得到產物.用SEM、XRD和X射線能譜手段對樣品的微觀結構和形貌進行了表征,研究了淀粉添加量、氫氣還原溫度對多孔鐵碳合金的影響,分析了產物粒徑大小與還原溫度之間的關系.結果表明,淀粉的最佳添加量為22%,氫氣的最佳還原溫度為750℃,產物的粒徑隨著還原溫度的升高而增大,產物微粒的平均粒徑為25~55 nm,且還原產物中碳的質量分?jǐn)?shù)為3%~4.5%.
[Abstract]:Based on the hydrolysis precipitation method, porous iron carbon alloy was prepared by adding pore-forming agent. Using Fe Cl3 6H2O as the main raw material and starch as the pore-making agent, different proportions of starch were added to the colloid, then filtered, dried, calcined, and then reduced by hydrogen at 650700750 鈩，

本文編號：2180778