本文選題：油頁巖灰渣　切入點：聚合氯化鋁　出處：《工業安全與環�！�2016年02期

【摘要】：以油頁巖灰渣為原料,采用酸法制備聚合氯化鋁,考察了酸溶條件對產品的鋁浸出率與鹽基度的影響。制備聚合氯化鋁的最佳酸溶條件為:酸的質量分?jǐn)?shù)22%,酸量比n(Al2O3)/n(HCl)為1∶13,酸溶溫度125℃,酸溶時間3 h。此條件下,鋁浸出率為73.65%,制備的液體聚合氯化鋁的鹽基度為77.51%。所制聚合氯化鋁符合國家標準(GB 15892—2003)中Ⅰ類液體一等品標準。
[Abstract]:Polyaluminium chloride was prepared from oil shale ash by acid method. The effects of acid solution conditions on the leaching rate and basicity of aluminum were investigated.The optimum conditions for the preparation of polyaluminium chloride are as follows: the mass fraction of acid is 22%, the ratio of acid content to Al _ 2O _ 3 / nHCl is 1: 13, the acid solution temperature is 125 鈩，

本文編號：1718831