【摘要】：采用半連續鑄造方法制備了A390合金管坯.研究了鑄造速度和鑄造溫度對A390合金管坯宏微觀組織的影響.結果表明:隨著鑄造速度由90 mm/min提升至120 mm/min、鑄造溫度由800℃增加至850℃,管坯中初生Si宏觀分布趨于均勻,初生Si顆粒的平均尺寸逐漸減小.截面尺寸為鐖164 mm/鐖60 mm的半連續鑄造A390合金管坯的最佳鑄造工藝參數為:鑄造速度110 mm/min、鑄造溫度850℃,可以獲得初生Si宏觀分布均勻、初生Si顆粒平均尺寸不超過26μm的管坯,管坯內側的抗拉強度為264 MPa,延伸率為0.5%.
[Abstract]:The A 390 alloy tube billet was prepared by semi-continuous casting. The effect of casting speed and casting temperature on macro-microstructure of A390 alloy tube billet was studied. The results show that with the increase of casting speed from 90 mm/min to 120 mm/min, casting temperature from 800 鈩，

本文編號：2348227