本文選題：協同焊接 + 變位機��； 參考：《計算機集成制造系統》2016年11期

【摘要】：為了獲得與時間序列相對應的離散焊點位姿,以更易于求得焊槍—焊點間的相對位姿,提出基于弗萊那—雪列矢量理論的曲線焊縫中離散焊點的位姿求解及焊縫坐標系構建方法�；谧兾粰C—機器人主、從運動鏈末端的耦合約束關系,提出以船型焊為最佳焊位時的協同焊接運動學模型及參數求解流程,據此求得協同焊接過程中機器人和變位機的關節轉角、角速度和角加速度。變位機—機器人協同焊接閥體密封面的運動仿真和現場實驗表明,該系統能夠平穩、準確地完成預期的焊接任務,證實了所提協同焊接運動學模型及參數求解方法正確可行,為研發自動化焊接生產線奠定了必要的基礎。
[Abstract]:In order to obtain discrete orientation of solder joint corresponding to time series, it is easier to obtain the relative orientation between welding torch and solder joint. This paper presents a method to solve the position and pose of discrete solder joints in curved welds based on Flina-Shelley vector theory and to construct the coordinate system of the welds. Based on the coupling constraint relationship between the robot and the positioner, the kinematics model and parameter solving process of the cooperative welding with ship type welding as the best welding position are proposed. Based on this, the joint rotation angle, angular velocity and angular acceleration of robot and positioner are obtained. The motion simulation and field experiment of positioner and robot cooperative welding valve body seal surface show that the system can smoothly and accurately complete the expected welding task, and proves that the proposed kinematics model and parameter solving method for cooperative welding are correct and feasible. For the development of automatic welding production line laid the necessary foundation.
【作者單位】： 上海工程技術大學機械工程學院;偉巴斯特車頂供暖系統(上海)有限公司研發部;
【分類號】：TP242.3

【相似文獻】

相關期刊論文 前5條

1 楊易琳;牛潮;江燕;;機器人焊接鋁合金模板的變位機設計[J];電焊機;2013年10期

2 李素萍;李永剛;;變位機在機器人焊接工作站中的應用[J];機器人技術與應用;2013年06期

3 王政,喬及森,樊丁,石s，

本文編號：2017311