本文選題：離心泵 + Android�。� 參考：《中北大學》2017年碩士論文

【摘要】：離心泵機組在生活與生產中有著廣泛的應用,為實現離心泵機組的安全高效運行,必須對其運行狀態進行實時監測。目前,對離心泵機組的狀態監測系統絕大多數還停留在只能在中控室進行監測的狀態,同時在需要進行設備巡檢的時候,巡檢人員需要對整個工廠的所有離心泵設備進行實地查看與記錄,會出現疲于跑現場的情況。針對以上問題,設計開發了基于Android的離心泵機組狀態監測系統,開發出一款專門用于離心泵機組遠程狀態監測的手機App,利用互聯網在移動客戶端實現對離心泵機組的遠程狀態監測和移動巡查。該系統的主要研究內容包括下面四部分:(1)首先對離心泵機組狀態監測的主要性能參數及傳統監測系統進行了研究,在此基礎上設計出了基于Android的離心泵機組遠程狀態監測系統的整體架構,將系統設計為四個組成模塊,并對傳感器、攝像頭、數據采集卡等硬件進行了選型。(2)選定常用的輸水管網系統中的離心泵機組作為本次監測對象,通過組態王軟件完成了上位機組態界面的開發設計,并將采集到的離心泵機組運行的各項數據寫入到MySQL數據庫。通過XAMPP集成軟件搭建了本地服務器,實現了數據從本地數據庫到服務器的傳輸。(3)通過Android Studio軟件結合上位機組態針對離心泵機組的各個監測對象設計開發手機了手機App,完成了App與服務器的實時數據傳輸,從而實現了手機端實時查看離心泵機組的運行參數、超限報警、遠程視頻監控等功能。(4)最后,在實驗室搭建了單臺離心泵實驗平臺,對整個系統的功能及性能進行了系統性測試,驗證了基于Android的離心泵機組狀態監測系統的實用性。本系統實現了手機客戶端對離心泵機組運行狀態的實時準確狀態監測,使在傳統工業現場中設備維護與調試的現場操作人員能夠更加準確、快速的獲取離心泵的相關參數,提高工作效率�！盎ヂ�(lián)網+”的提出加快了互聯網與傳統工業的融合,本系統緊跟最新發展趨勢,實現了互聯網和傳統狀態監測的融合,對工業上的離心泵機組狀態監測具有重要的探索意義和實用價值。
[Abstract]:Centrifugal pump unit is widely used in daily life and production. In order to realize the safe and efficient operation of centrifugal pump unit, it is necessary to monitor its running state in real time. At present, most of the condition monitoring systems for centrifugal pump units remain in a condition that can only be monitored in the central control room, and at the same time, when equipment inspection is required, Inspectors need to inspect and record all the centrifugal pump equipment in the whole plant. Aiming at the above problems, the condition monitoring system of centrifugal pump unit based on Android is designed and developed. A mobile phone Appware is developed for remote condition monitoring of centrifugal pump units. Remote condition monitoring and mobile inspection of centrifugal pump units are realized by using the Internet in mobile clients. The main research contents of this system include the following four parts: 1) first, the main performance parameters and traditional monitoring system of centrifugal pump unit condition monitoring are studied. On this basis, the whole structure of the remote condition monitoring system of centrifugal pump unit based on Android is designed. The system is designed into four modules, and the sensor, camera, etc. The data acquisition card and other hardware are selected to select the centrifugal pump unit in the water transmission network system as the monitoring object, and the configuration interface of the upper computer is developed and designed by Kingview software. And the collected centrifugal pump unit running data is written to the MySQL database. The local server is built by XAMPP integration software. This paper realizes the transmission of data from local database to server. It designs and develops the mobile phone App through the Android Studio software combined with the configuration of the upper computer for each monitoring object of the centrifugal pump unit, and completes the real-time data transmission between App and the server. Thus realized the mobile phone end real-time view centrifugal pump unit operating parameters, over-limit alarm, remote video monitoring and other functions. Finally, a single centrifugal pump experimental platform was built in the laboratory. The function and performance of the whole system are systematically tested, and the practicability of the condition monitoring system of centrifugal pump unit based on Android is verified. The system realizes the real-time and accurate monitoring of the running state of the centrifugal pump unit by the mobile phone client, so that the operators who maintain and debug the equipment in the traditional industrial field can obtain the relevant parameters of the centrifugal pump more accurately and quickly. Improve working efficiency. The introduction of "Internet" speeds up the integration of the Internet and traditional industries. The system closely follows the latest development trend and realizes the integration of the Internet and traditional state monitoring. It is of great significance and practical value for condition monitoring of centrifugal pump units in industry.
【學位授予單位】：中北大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TH311;TP274

【參考文獻】

相關期刊論文 前10條

1 孫立;;工業大數據對智慧云制造的推動與創新[J];科技管理研究;2016年13期

2 燕樂;陳東紅;孔齡婕;張鵬;王二偉;丑修建;;新型MEMS壓電微能源驅動的乳化液泵站ZigBee振動監測系統研究[J];電子器件;2016年03期

3 廖子龍;盧玉婷;;設備智能監測對于移動通訊技術的運用[J];信息通信;2016年02期

4 吳青林;周天宏;;基于移動終端和LabVIEW的智能家居控制系統研究[J];現代電子技術;2016年02期

5 宋慧欣;;打造中國版“智能工廠”,中國工業企業在行動[J];自動化博覽;2016年01期

6 陳俊良;葛俊鋒;葉林;桂康;;基于�？低昐DK的視頻監控軟件的開發[J];工業控制計算機;2015年07期

7 申智昕;;離心泵特性曲線在水泵運行管理中的實踐[J];山東工業技術;2015年11期

8 趙鑫;;基于NoSQL數據庫的大數據處理分析[J];電腦知識與技術;2015年11期

9 信昆侖;錢昊;陶濤;;移動互聯及大數據技術在供水行業管理中的應用分析[J];給水排水;2014年09期

10 李啟t，

本文編號：1940118