本文選題：粘膠纖維 + 回潮率�。� 參考：《華北理工大學》2017年碩士論文

【摘要】：粘膠纖維是一種可再生資源,它不但彌補了天然纖維產量不足的缺陷,而且在質量的某些方面優于合成纖維,被廣泛應用于生活,工業領域。隨著人類對纖維制品的性能要求逐漸提高,產品的質量高低影響著企業的發展與效益。以引進奧地利LENZING公司的一種對粘膠纖維預烘干技術為基礎,結合本公司生產實際操作要求加以技術改造,替代了原濕開松工藝處理,彌補了原工藝對粘膠纖維開松效果差,布絲不均勻的缺點,同時有利于纖維產品的穩定回潮,避免了設備漏毛的浪費現象。通過對粘膠纖維生產濕開松工藝流程簡介,闡述了工藝生產中存在的問題,對控制系統的整體方案進行分析與選擇,結合對人身安全與現場設備保護的需求,提出系統控制要求與方案,完成對濕毛風送電氣儀表控制系統的設計,其中包括聲光報警系統,安全聯鎖系統,電機控制系統。采用SIEMENS公司S7-400集散控制系統,完成對DCS控制系統硬件與軟件的設計,包括硬件的選型與組態、控制聯鎖程序、上位機監控,能夠滿足對過程生產的控制需求。濕毛風送的主要設備均采用變頻控制技術,不僅降低了能源消耗,還實現了平滑的調速控制,同時普遍應用電氣與軟件的連鎖控制,生產得到了穩定的運行。
[Abstract]:Viscose fiber is a kind of renewable resource. It not only makes up for the shortage of natural fiber production, but also is better than synthetic fiber in some aspects of quality. It is widely used in life and industry. With the improvement of the performance requirements of fiber products, the quality of the products affects the development and benefit of enterprises. Based on a pre-drying technology of viscose fiber introduced from LENZING Company of Austria and combined with the practical operation requirements of the company, the technology was reformed to replace the original wet opening and loosening process, which made up for the poor opening effect of the original technology on viscose fiber. The inhomogeneity of cloth is also beneficial to the steady return of fiber products and the waste of equipment leakage. Based on the brief introduction of the wet opening and loosening process of viscose fiber production, the problems existing in the process production are expounded, the overall scheme of the control system is analyzed and selected, and the requirements of personal safety and field equipment protection are combined. The control requirements and schemes of the system are put forward, and the design of the control system of the wet hair air transmission electrical instrument is completed, including the acousto-optic alarm system, the safety interlocking system and the motor control system. The hardware and software of DCS control system are designed by using S7-400 distributed control system of SIEMENS company, including hardware selection and configuration, control interlocking program, upper computer monitoring, which can meet the control requirements of process production. The main equipment used in wet hair air transmission is frequency conversion control technology, which not only reduces the energy consumption, but also realizes the smooth speed regulation control. At the same time, the interlocking control of electric and software is widely used, and the production has been running stably.
【學位授予單位】：華北理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TQ341.1;TP273

【參考文獻】

相關期刊論文 前10條

1 王鵬;;粘膠纖維生產創新工藝及效果評估分析[J];中國新技術新產品;2016年18期

2 張霞恩;;8萬噸/年粘膠短纖維生產線烘干喂入機技術改造[J];人造纖維;2015年06期

3 顧超英;;2015年10月份粘膠纖維上下游市場行情分析與預測[J];人造纖維;2015年05期

4 ，

本文編號：1934066