本文選題：事物特性表 + 變型設計��； 參考：《桂林電子科技大學》2017年碩士論文

【摘要】：變型設計應用相似性、重用性和全局性原理對定制產品進行重組,提高已有零件使用率,增加客戶選擇范圍。根據客戶定制需求,以批量生產的方式,低價、高質、高效的生產出定制產品。當前較為常用的變型設計方法雖然在一定程度上滿足了客戶的個性化定制需求,但是在變型設計中對于重用性原理應用的還是不夠,并且不能實現產品信息的推理功能。針對上文提到的變型設計重用性應用不夠、不能實現推理這兩個問題,本文引入事物特性表技術和本體技術。提出本體和事物特性表相結合對產品進行變型設計的方法。分析定制產品并得到其相關參數的事物特性表,建立產品主模型和事物特性之間的關系。用描述邏輯對定制產品的事物特性表進行刻畫,建立定制產品事物特性表的語義表示模型。將定制產品的主模型和產品的主結構添加在建好的事物特性表中,對事物特性表進行擴展,利用之前建好的本體對產品相關信息進行推理。本文完成工作分為以下三方面:第一,基于事物特性表技術構建變型設計產品本體知識庫。分析變型設計產品的零件組成及零部件之間關系,用網絡本體語言對其進行定義;根據產品參數約束關系、裝配約束關系、專家經驗等相關知識,用語義網規則語言對其進行表示。將產品零件的結構化知識置換為Jess事實,定制產品尺寸約束關系、定制產品裝配約束關系等置換為Jess規則,利用Jess推理機對變型設計產品的相關信息進行推理以得到需求信息。通過減速箱齒輪軸實例驗證了這一做法的正確性,為實現產品的變型設計提供理論基礎。第二,基于本體和事物特性表的變型設計方法。利用本體的知識重用性這一優點,在構建的事物特性表本體基礎上,將定制產品的主模型和主結構添加到事物特性表中對其進行擴展,在此基礎上構建了導出參數、主模型、主結構等的推理規則。最后,開發了基于本體和事物特性表的定制系統。在前面構建定制產品本體知識庫的基礎上,構建了定制產品知識庫的系統框架。protégé軟件和Java程序設計語言相結合,開發基于本體和事物特性表的定制系統,在定制系統中針對變型設計產品實例演示了各項功能操作。
[Abstract]:Based on the principle of similarity, reusability and globality of variant design, custom-made products are reorganized to increase the utilization rate of existing parts and increase the scope of customer selection.According to the customer's custom demand, mass production, low-cost, high-quality, high-efficient production of customized products.Although the commonly used variant design methods to some extent meet the needs of customer customization, but in variant design, the reuse principle is not enough, and the reasoning function of product information can not be realized.In view of the two problems that the reusability application of variant design mentioned above is not enough to realize reasoning, this paper introduces the technology of object characteristic table and ontology.This paper presents a method of product variant design based on ontology and tabular feature table.The relationship between the main model of the product and the characteristics of the product is established by analyzing the list of things characteristic of the customized product and obtaining the relevant parameters.The description logic is used to describe the object characteristic table of custom product, and the semantic representation model of custom product thing characteristic table is established.The main model of customized product and the main structure of product are added to the set of things characteristic table to extend the table of things characteristics and to infer the relevant information of product by using the pre-built ontology.The work of this paper is divided into the following three aspects: firstly, the knowledge base of variant design product ontology is constructed based on the tabular technology of transaction characteristics.This paper analyzes the components composition and the relationship between parts of variant design products, defines them by network ontology language, and according to the relevant knowledge of product parameter constraint relation, assembly constraint relation, expert experience, etc.It is represented by semantic web rule language.The structural knowledge of product parts is replaced with Jess fact, the size constraint relation of product and assembly constraint relation of product are changed into Jess rules, and the relevant information of variant design product is inferred by Jess inference engine to obtain the requirement information.The correctness of this method is verified by an example of gear shaft of reducer box, which provides a theoretical basis for realizing the variant design of the product.Secondly, the variant design method based on ontology and object characteristic table.Taking advantage of the knowledge reusability of ontology, the main model and main structure of customized products are added to the table of things characteristics to extend them on the basis of building the ontology of object characteristics table. On this basis, the derived parameters and main model are constructed.The rules of reasoning for the main structure, etc.Finally, a custom system based on ontology and object characteristic table is developed.On the basis of constructing customized product ontology knowledge base, the system framework of customized product knowledge base. Prot 茅 g 茅 software and Java programming language are combined to develop customization system based on ontology and object characteristic table.In the customization system, the function operation of variant design product is demonstrated.
【學位授予單位】：桂林電子科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP311.52;TP18

【參考文獻】

相關期刊論文 前10條

1 孟瑜;古天龍;常亮;李鳳英;;面向裝配序列規劃的裝配本體設計[J];模式識別與人工智能;2016年03期

2 周濟;;智能制造——“中國制造2025”的主攻方向[J];中國機械工程;2015年17期

3 魏圓圓;錢平;王儒敬;王雪;;知識工程中的知識庫、本體與專家系統[J];計算機系統應用;2012年10期

4 喬虎;莫蓉;陳濤;宮中偉;;變型設計知識庫構建方法研究[J];中國機械工程;2011年16期

5 常亮;史忠植;陳立民;牛溫佳;;一類擴展的動態描述邏輯[J];軟件學報;2010年01期

6 蘇少輝;紀楊建;祁國寧;陳國金;;面向ETO產品大批量定制的項目規劃方法[J];浙江大學學報(工學版);2009年10期

7 常亮;史忠植;邱莉榕;林芬;;動態描述邏輯的Tableau判定算法[J];計算機學報;2008年06期

8 趙建勛;張振明;田錫天;賈曉亮;朱名銓;;本體及其在機械工程中的應用綜述[J];計算機集成制造系統;2007年04期

9 劉夫云;祁國寧;;配置產品尺寸參數傳遞方法及其應用[J];機械工程學報;2007年04期

10 杜小勇;李曼;王珊;;本體學習研究綜述[J];軟件學報;2006年09期

相關博士學位論文 前4條

1 顧巧祥;面向產品全生命周期配置標識關鍵技術研究[D];浙江大學;2006年

2 楊青海;大批量定制原理與若干關鍵技術研究[D];浙江大學;2006年

3 郭津津;面向機械產品族的變型設計技術研究及其應用[D];天津大學;2004年

4 余軍合;面向全生命周期虛擬產品模型的研究與應用[D];浙江大學;2002年

相關碩士學位論文 前10條

1 朱朝軒;自動開封蓋裝置快速變型設計中的設計重用技術與系統集成方法研究[D];電子科技大學;2016年

2 梁毅芳;支持變型設計的三維產品語義搜索研究[D];桂林電子科技大學;2016年

3 周嘉梁;面向大批量定制的NC程序變型設計方法研究[D];浙江理工大學;2016年

4 王冰清;基于本體的功能公差分析知識庫系統研究[D];桂林電子科技大學;2014年

5 渠元菊;變型設計中尺寸約束及參數傳遞研究[D];沈陽理工大學;2013年

6 孫媛媛;基于語義網的幾何自動推理研究及其應用[D];電子科技大學;2013年

7 章宏;基于事物特性表的有限元模型快速變型設計方法及應用研究[D];浙江大學;2007年

8 沈振華;復雜產品變型設計方法研究及其應用[D];浙江大學;2006年

9 陳琮;基于Jena的本體檢索模型設計與實現[D];武漢大學;2005年

10 張志勇;面向大批量定制的產品設計技術研究[D];浙江大學;2005年

，

本文編號：1753211