【摘要】：監護儀作為作為醫院必不可缺的醫療設備，，其電氣參數檢測具有重要意義。在傳統上，監護儀電氣參數需要第三方設備進行檢測，其檢測過程麻煩，漏檢率高。本文通過Zigbee無線組網實現監護儀電氣參數以及運行狀態實時監測。Zigbee是一種短距離無線通信協議，其特點是成本低、功耗小、組網簡單，在Zigbee無線網絡中可以實現對移動目標實時監測和通信管理的功能。本文用以CC2530芯片為硬件基礎，按照Zigbee協議進行無線射頻模塊設計，組建一個Zigbee無線通信網絡。 首先，本文通過對國內監護儀監測系統的應用狀況以及電氣安全檢測做了簡單介紹。根據對無線通信技術的比較以及實際需求的分析，闡述Zigbee無線技術的優越性。同時對Zigbee網絡拓?fù)湟约癦igbee協議棧做了詳細介紹。 其次，利用CC2530芯片對Zigbee基站模塊進行了硬件設計，接著對監護儀電氣安全部分檢測給出了嵌入式原理設計方案。并以RSSI測距算法與三邊定位算法結合為基礎，實現移動目標的無線定位。接著通過在上位機建立基站間信號衰減系數關聯稀疏矩陣，實現運用查表法優化定位。 然后，本文在運用C Sharp語言對客戶端軟件進行了設計，為設備管理、地圖加載、報警信息統計查詢以及動態的實時監測等窗口設計了簡單、快捷面的人機界面。實現客戶端實時監控的要求。 最后，經過相關測試，電氣安全等報警信息以及監護儀定位都得到滿意結果，其通信基本能達到實時、快捷、穩定、安全的要求。
[Abstract]:As an indispensable medical equipment in hospital, it is of great significance to detect the electrical parameters of the monitor. Traditionally, the electrical parameters of the monitor need to be detected by third-party equipment, and the detection process is troublesome and the rate of missing detection is high. In this paper, Zigbee wireless network is used to realize real time monitoring of electrical parameters and running status of monitor. Zigbee is a short distance wireless communication protocol, which is characterized by low cost, low power consumption and simple networking. The function of real-time monitoring and communication management of mobile target can be realized in Zigbee wireless network. This paper uses CC2530 chip as hardware base, designs radio frequency module according to Zigbee protocol, and sets up a Zigbee wireless communication network. Firstly, this paper introduces the application of domestic monitor system and electrical safety detection. According to the comparison of wireless communication technology and the analysis of actual demand, the superiority of Zigbee wireless technology is expounded. At the same time, the Zigbee network topology and Zigbee protocol stack are introduced in detail. Secondly, the hardware of Zigbee base station module is designed by using CC2530 chip, and then the embedded principle design scheme is given to monitor the electrical security of monitor. Based on the combination of RSSI ranging algorithm and trilateral location algorithm, the wireless location of moving target is realized. Then, the correlation sparse matrix of signal attenuation coefficient between base stations is established on the host computer, and the optimization of location is realized by using the look-up table method. Then, the client software is designed by using C Sharp language, and a simple and quick interface is designed for the windows such as equipment management, map loading, alarm information statistic query and dynamic real-time monitoring. The requirement of client real-time monitoring is realized. Finally, after relevant tests, the alarm information such as electrical safety and the location of the monitor are satisfactory. The communication can basically meet the requirements of real-time, fast, stable and safe.
【學位授予單位】：遼寧工業大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TH772

【參考文獻】

相關期刊論文 前10條

1 諸強,王學民,胡賓,王明時;無線遠程醫療系統[J];北京生物醫學工程;2004年03期

2 朱向慶;王建明;;ZigBee協議網絡層的研究與實現[J];電子技術應用;2006年01期

3 陳永強;劉宗航;張春英;;對醫用電氣設備漏電流測量的幾點認識[J];廣東科技;2009年04期

4 顧凌威;吳比;劉天;;醫療設備電氣安全的漏電流檢測[J];產業與科技論壇;2013年16期

5 韓旭;于小億;;基于紅外線通信的數據采集與網絡控制[J];黑龍江工程學院學報(自然科學版);2011年04期

6 劉玉宏;于彬;;一種RSSI室內三邊定位方案的設計與實現[J];計算機與現代化;2011年10期

7 李新;;基于CC2530的Zigbee網絡節點設計[J];可編程控制器與工廠自動化;2011年03期

8 田永軍;賈國慶;;A-GPS定位技術在智能手機中的研究與應用[J];科技信息;2009年04期

9 何燕,胡捍英,周山;一種新的TOA無線定位算法[J];無線電通信技術;2004年01期

10 章偉聰;俞新武;李忠成;;基于CC2530及ZigBee協議棧設計無線網絡傳感器節點[J];計算機系統應用;2011年07期

本文編號：2281818