本文關鍵詞：基于熱電偶的控溫器設計，由筆耕文化傳播整理發布。

哈 爾 濱 理 工 大 學 畢 業 設 計 題 目： 院 系： 2013年 6 月 21 日 基于熱電偶的控溫器設計 摘要 熱電偶（thermocouple）是溫度測量儀表中常用的測溫元件，，它直接測量溫度，并把溫度信號轉換成熱電動勢信號。各種熱電偶的外形常因需要而極不相同，但是它們的基本結構卻大致相同，通常由熱電極、絕緣套保護管和接線盒等主要部分組成。 Thermocouple thermocouple is a commonly used temperature sensor temperature measurement instrument, It measure the temperature directly, and the temperature signal is converted into the thermal electromotive force one.The shape of the thermocouple is not the same because the different needs. but their basic structure are roughly the same, and usually compose of a hot electrode, insulating sleeve tube protector and the junction box and other main parts . This research is about the research of an anti-disturbed temperature controller with thermocouple as its thermal sensor.In order to make the temperature controller work stably and reliably in a complicated electromagnetic environment,different methods are used in the design stage.These methods cover different stages of the design,including the design of the hardware circuit,the layout of the printed circuit board PCB ,and the software design. In the design of the hardware circuit,in order to improve the accuracy of the temperature controller,it’s necessary to do some work on the cold junction compensation.Because the thermocouple is usually work with its cold junction in the room temperature rather than in the standard of 0℃.In the PCB design stage,three design hierarchies are used to make the temperature controller immune to the disturbance of the electromagnetic environment,these hierarchies include:powersupply,electric cable,and the printed circuit board.In the software design,the digital filter is used to finally filter the disturb si

  本文關鍵詞：基于熱電偶的控溫器設計，由筆耕文化傳播整理發布。