本文選題：關節式坐標測量機　切入點：平衡　出處：《電子測量與儀器學報》2016年10期

【摘要】：關節式坐標測量機力平衡部件結構和參數配置直接影響測量機的測量精度和平衡效果。使用彎曲壓簧式平衡部件實現一種6自由度(6DOF)關節式坐標測量機的平衡。通過MATLAB軟件對壓簧結構參數進行分析,建立關鍵參數與平衡效果之間的關系,為彎曲壓簧式平衡部件的設計提供了理論依據;利用ANSYS軟件對彎曲壓簧進行仿真受力分析,優化彎曲壓簧平衡部件,并通過實驗進行檢驗。實驗結果表明,利用彎曲壓簧可以實現關節式坐標測量機的平衡。
[Abstract]:The structure and parameter configuration of the force balance part of the joint coordinate measuring machine (CMM) have a direct influence on the measuring accuracy and the balance effect of the measuring machine. The structural parameters of pressure spring are analyzed by MATLAB software. The relationship between the key parameters and the balance effect is established, which provides a theoretical basis for the design of the bending pressure spring balancing parts, and makes use of the ANSYS software to simulate the force analysis of the bending pressure spring, and optimizes the bending pressure spring balance parts. The experimental results show that the balance of the joint coordinate measuring machine can be realized by using the bending spring.
【作者單位】： 合肥工業大學儀器科學與光電工程學院;
【基金】：國家重大科學儀器設備開發專項(2013YQ220893) 國家自然科學基金(51375137) 111引智計劃(B12019)資助項目
【分類號】：TH721
，

本文編號：1692147