【摘要】：雷達的目標顯示及控制終端作為雷達系統的重要組成部分,必須能夠?qū)走_(dá)系統進行精確控制,負責顯示雷達目標信息、狀態信息、GPS定位等信息,是操作員與雷達系統進行交互的平臺。本文開展基于嵌入式系統的雷達顯控終端的研究,采用先進的嵌入式技術,設計實現雷達顯控的智能終端,對提高便攜式近程戰場偵察雷達的性能有重要意義。 本文首先對雷達顯控終端的功能需求進行綜合分析,提出嵌入式雷達顯控終端的主要功能和技術性能指標,設計了基于嵌入式技術的雷達顯控終端硬件總體方案和軟件系統架構。選擇三星Exynos4412處理器作為嵌入式系統的核心部件,以此為基礎建立硬件平臺。其次,針對系統實時性的要求,選擇嵌入式Linux作為本系統的操作系統,并搭建基于目標機-宿主機模式的交叉編譯環境。作為系統設計的重要內容,顯控終端軟件采用模塊化設計,包括：基于Qt/Embedded的人機交互界面設計；雷達參數設置模塊設計；雷達狀態顯示模塊設計；B顯與P顯兩種顯示模式下雷達目標顯示模塊的設計；基于以太網與串口兩種通信方式的通信模塊設計。最后,將顯控終端軟件移植到硬件平臺進行系統聯調,充分驗證了嵌入式顯控終端系統設計的正確性。
[Abstract]:As an important part of radar system, radar target display and control terminal must be able to accurately control radar system, be responsible for displaying radar target information, state information, GPS positioning and other information, and is a platform for operators to interact with radar system. In this paper, the research of radar display and control terminal based on embedded system is carried out, and the intelligent terminal of radar display control is designed and realized by using advanced embedded technology, which is of great significance to improve the performance of portable short-range battlefield reconnaissance radar. In this paper, the functional requirements of radar display and control terminal are comprehensively analyzed, the main functions and technical performance indexes of embedded radar display and control terminal are put forward, and the overall hardware scheme and software system architecture of radar display and control terminal based on embedded technology are designed. Samsung Exynos4412 processor is selected as the core component of embedded system, on the basis of which the hardware platform is established. Secondly, in order to meet the real-time requirements of the system, embedded Linux is selected as the operating system of the system, and a cross-compiling environment based on the target machine-host mode is built. As an important part of the system design, the display and control terminal software adopts modularization design, including: human-computer interaction interface design based on Qt/Embedded; radar parameter setting module design; radar state display module design; radar target display module design under B display and P display mode; communication module design based on Ethernet and serial port. Finally, the software of the display and control terminal is ported to the hardware platform for system adjustment, which fully verifies the correctness of the design of the embedded display and control terminal system.
【學位授予單位】：南京理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN957.7

【參考文獻】

相關期刊論文 前10條

1 徐廣毅 ,張曉林 ,崔迎煒 ,蔣文軍;Qt/Embedded在嵌入式Linux系統中的應用[J];單片機與嵌入式系統應用;2004年12期

2 何劍鋒;鄔文彪;李宏穆;劉念聰;;嵌入式Linux系統的Qt/Embedded圖形界面開發[J];電子工程師;2007年07期

3 于慧穎;魯敏;雍少為;;雷達PPI光柵掃描顯示系統設計與實現[J];國防科技大學學報;2007年01期

4 方豐平;陳純;卜佳俊;;嵌入式環境下高性能可配置GUI系統設計[J];計算機工程與應用;2006年30期

5 華晶;賈晶;何火嬌;;基于Qt/Embedded的嵌入式GUI在ARM上的移植[J];計算機與現代化;2009年10期

6 邱榮欽;雷達技術的發展[J];電子科學技術評論;2005年03期

7 楊建宇;;雷達技術發展規律和宏觀趨勢分析[J];雷達學報;2012年01期

8 陸蓮芳;;基于ARM的嵌入式系統開發方法及其應用研究[J];軟件導刊;2012年07期

9 孫少華,徐立中;面向嵌入式Linux系統的圖形用戶界面[J];微機發展;2005年10期

10 游燕珍;趙國鋒;徐川;;基于Qt/E的嵌入式GUI的研究及其移植[J];微計算機信息;2008年14期

相關博士學位論文 前1條

1 吳駿;智能交通系統中的信息處理關鍵技術研究[D];天津大學;2007年

，

本文編號：2500238