GMR通信系統無線資源控制層協議軟件的設計與實現
發布時間：2019-05-17 09:25
【摘要】：如今新一代衛星移動通信系統大多數都支持GMR-1 3G(GMR,Geostationary earth orbit Mobile Radio interface)標準,該標準是由歐洲電信標準化研究所ETSI(European Telecommunications Standards Institute)發布的地球同步軌道衛星移動通信空中接口技術規范,從基于GSM(Global System for Mobile communication)標準的通信系統GMR-1演化而來。GMR-13G通信系統為地面提供基于同步衛星的3G移動通信業務,而如何保證對通信過程中控制信令的有效處理并進行可靠傳輸是整個系統研究實現中需要解決的重要問題。與GMR-1先前發布的版本相比,空中接口協議部分的第三層即RRC(Radio Resource Control)層的功能發生了較大的改變,控制管理功能主要集中在了RRC層中,狀態控制及協議中規定的連接狀態也發生了相應的變動。本文關于GMR通信系統無線資源控制層協議軟件的設計與實現就是以解決上述問題為基礎,依附于整個GMR-1 3G協議棧系統軟件,最終完成了RRC無線資源控制層的主體功能,即對通話過程和入網過程中控制信令進行有效的處理。本文是以GMR-1 3G標準的基站側空中接口協議為基礎,在對協議總體有所了解之后,對RRC層協議進行了詳細的分析和研究,然后設計并編碼實現了協議中對RRC層關于控制消息的處理功能。在RRC系統設計過程中,將其劃分為模塊設計和過程設計。在實現過程中,是基于Vx Works實時操作系統的Workbench集成開發環境和C語言來實現代碼的編寫和編譯,并使用基于Vx Works實時操作系統的AM4140板卡來完成對RRC系統的功能和協議的一致性驗證。本文所設計的RRC層系統架構和基于Vx Works操作系統的C語言實現,很好的完成了RRC層對來自各層的控制消息、請求及其它事件的處理,實現了RRC過程在一次資源分配下的流程控制。通過和終端、核心網的聯合測試,RRC層能完成終端入網和通話過程中協議規定的所有功能。
[Abstract]:Today, most of the new generation of satellite mobile communication systems support GMR-1 3G (GMR,Geostationary earth orbit Mobile Radio interface) standard). The standard is a technical specification for the air interface of geosynchronous orbiting satellite mobile communications issued by the European Institute for Telecommunications Standardization (ETSI (European Telecommunications Standards Institute). Evolved from GMR-1, a communication system based on GSM (Global System for Mobile communication) standard. GMR-13G communication system provides 3G mobile communication services based on synchronous satellites for the ground. How to ensure the effective processing and reliable transmission of control signaling in the communication process is an important problem to be solved in the research and implementation of the whole system. Compared with the previous version of GMR-1, the function of the third layer of the air interface protocol, that is, the RRC (Radio Resource Control) layer, has been greatly changed, and the control and management functions are mainly concentrated in the RRC layer. The state control and the connection state specified in the protocol have also changed accordingly. In this paper, the design and implementation of wireless resource control layer protocol software for GMR communication system is based on solving the above problems, attached to the whole GMR-1 3G protocol stack system software, and finally completed the main function of RRC wireless resource control layer. That is to say, the control signaling in the process of calling and entering the network is processed effectively. This paper is based on the base station air interface protocol of GMR-1 3G standard. After understanding the protocol as a whole, the RRC layer protocol is analyzed and studied in detail. Then the processing function of control message in RRC layer is designed and encoded. In the process of RRC system design, it is divided into module design and process design. In the process of implementation, the Workbench integrated development environment and C language based on Vx Works real-time operating system are used to write and compile the code. The AM4140 board based on Vx Works real-time operating system is used to verify the function and protocol of RRC system. The RRC layer system architecture and the C language implementation based on Vx Works operating system are designed in this paper, and the RRC layer processes the control messages, requests and other events from each layer very well. The process control of RRC process under the primary resource allocation is realized. Through the joint test with the terminal and the core network, the RRC layer can complete all the functions specified in the protocol during the terminal access to the network and the call process.
【學位授予單位】：哈爾濱工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN927.23
本文編號：2478991
[Abstract]:Today, most of the new generation of satellite mobile communication systems support GMR-1 3G (GMR,Geostationary earth orbit Mobile Radio interface) standard). The standard is a technical specification for the air interface of geosynchronous orbiting satellite mobile communications issued by the European Institute for Telecommunications Standardization (ETSI (European Telecommunications Standards Institute). Evolved from GMR-1, a communication system based on GSM (Global System for Mobile communication) standard. GMR-13G communication system provides 3G mobile communication services based on synchronous satellites for the ground. How to ensure the effective processing and reliable transmission of control signaling in the communication process is an important problem to be solved in the research and implementation of the whole system. Compared with the previous version of GMR-1, the function of the third layer of the air interface protocol, that is, the RRC (Radio Resource Control) layer, has been greatly changed, and the control and management functions are mainly concentrated in the RRC layer. The state control and the connection state specified in the protocol have also changed accordingly. In this paper, the design and implementation of wireless resource control layer protocol software for GMR communication system is based on solving the above problems, attached to the whole GMR-1 3G protocol stack system software, and finally completed the main function of RRC wireless resource control layer. That is to say, the control signaling in the process of calling and entering the network is processed effectively. This paper is based on the base station air interface protocol of GMR-1 3G standard. After understanding the protocol as a whole, the RRC layer protocol is analyzed and studied in detail. Then the processing function of control message in RRC layer is designed and encoded. In the process of RRC system design, it is divided into module design and process design. In the process of implementation, the Workbench integrated development environment and C language based on Vx Works real-time operating system are used to write and compile the code. The AM4140 board based on Vx Works real-time operating system is used to verify the function and protocol of RRC system. The RRC layer system architecture and the C language implementation based on Vx Works operating system are designed in this paper, and the RRC layer processes the control messages, requests and other events from each layer very well. The process control of RRC process under the primary resource allocation is realized. Through the joint test with the terminal and the core network, the RRC layer can complete all the functions specified in the protocol during the terminal access to the network and the call process.
【學位授予單位】：哈爾濱工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN927.23
【參考文獻】
相關期刊論文 前1條
1 朱芹;屈剛;劉璐;;TD-LTE系統連接建立過程的研究與實現[J];信息技術;2013年08期
，本文編號：2478991
本文鏈接：http://sikaile.net/kejilunwen/wltx/2478991.html
最近更新
教材專著
