【摘要】：隨著工業自動化技術的快速發展,工業生產中對生產過程的控制的要求越來越高,生產復雜度也相應增加,而以往普通的人工操作已經滿足不了現代工業生產的發展需求。所以,近年來計算機技術和嵌入式技術已經逐漸被引入到工業生產中,使其在工業生產中發揮出優勢。本文是通過基于嵌入式的工業以太網技術來解決工業生產中的數據傳輸問題,證明了工業以太網技術在工業生產中的有效性和實用性。溫度是工業生產中重要的參數之一,隨著工業生產過程的復雜度增加,對溫度測量的要求也越來越嚴格,所以在本課題中分別使用K型熱電偶和熱電阻PT100對工業生產中的溫度進行測量。系統中對溫度傳感器的數據采集和處理主要使用TI公司的低功耗微處理器MSP430F5529,并通過工業現場總線協議Modbus協議將采集的數據傳送至網絡終端系統。數據采集部分的硬件部分主要包括熱電阻測溫、熱電偶測溫、0~10mA以及4~20mA信號的采集部分。本文系統的網絡終端是通過網絡控制芯片ENC28J60和TI公司的低功耗芯片MSP430F5529來設計和開發的。主控制器MSP430F5529編寫相應的以太網控制器驅動程序來驅動以太網的發送和接收,然后把經過剪裁的TCP/IP協議移植到主控制芯片,最后通過網絡接口RJ45來實現本地的局域網的通信。上位機部分是使用NI公司的LabVIEW軟件進行編寫,主要包括數據的接收部分、數據的保存部分、數據的顯示部分三個方面。數據的接收部分主要是通過TCP/IP協議來實現數據的接收。數據的保存主要是通過數據庫將接收的數據進行保存。數據的顯示部分主要是對下位機發送上來的數據進行實時顯示,實現工業現場的實時監控。通過上述三個部分,本課題不僅實現工業現場的溫度采集,而且實現了工業現場的以太網控制,使得整個工業生產的勞動力減少、操作簡單,并且實現了遠程監控,對整個工業生產具有重要的意義。
[Abstract]:With the rapid development of industrial automation technology, the demand of industrial production for the control of production process is more and more high, and the production complexity increases accordingly. But the common manual operation has been unable to meet the needs of the development of modern industrial production in the past. Therefore, in recent years, computer technology and embedded technology have been gradually introduced into industrial production, so that it plays an important role in industrial production. In this paper, the problem of data transmission in industrial production is solved based on embedded industrial Ethernet technology, which proves the validity and practicability of industrial Ethernet technology in industrial production. Temperature is one of the most important parameters in industrial production. As the complexity of industrial production increases, the requirement of temperature measurement becomes more and more strict. Therefore, K-thermocouple and PT100 are used to measure the temperature in industrial production. The low power microprocessor MSP430F5529 of TI company is used to collect and process the data of temperature sensor, and the collected data is transmitted to the network terminal system by Modbus protocol. The hardware of the data acquisition part mainly includes the thermal resistance temperature measurement, the thermocouple temperature measurement and the 4~20mA signal acquisition. In this paper, the network terminal is designed and developed by the network control chip ENC28J60 and TI's low power chip MSP430F5529. The main controller MSP430F5529 writes the corresponding Ethernet controller driver to drive the transmission and reception of Ethernet, then transplants the clipped TCP/IP protocol to the master control chip, finally realizes the local LAN communication through the network interface RJ45. The upper computer part is written with NI company's LabVIEW software, including the receiving part of data, the saving part of data, and the display part of data. The receiving part of data is mainly realized by TCP/IP protocol. Data storage is mainly through the database will receive the data to save. The display part of the data is mainly to display the data sent from the lower computer in real time and realize the real-time monitoring of the industrial field. Through the above three parts, this subject not only realizes the temperature collection in the industrial field, but also realizes the Ethernet control in the industrial field, which makes the labor force of the whole industrial production reduce, the operation is simple, and the remote monitoring is realized. It is of great significance to the whole industrial production.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN915.05

【參考文獻】

相關期刊論文 前1條

1 司馬莉萍;賀貴明;陳明榜;;基于Modbus/TCP協議的工業控制通信[J];計算機應用;2005年S1期

相關碩士學位論文 前1條

1 劉鋒;基于ModBus的現場總線控制系統研究與設計[D];重慶大學;2007年

，

本文編號：2147955