增加PIFA手機天線帶寬的優化設計方法研究
發布時間:2018-06-22 10:17
本文選題:寬頻帶 + 低剖面; 參考:《華東理工大學》2014年碩士論文
【摘要】:本文針對目前智能手機對天線的普遍要求設計了一種低剖面寬頻帶天線。天線工作頻段為GSM900M\DCS1800M\PCS1900M\TD1900M\TD2100M, PIFA形式天線。體積53mm*8mm*3mm面積531mm2。為充分適應智能機的需要,該天線高度比較低,靠主板邊緣處2mm,靠主板內側最高的地方4mm,平均高度3mm。該天線在結構上采用傾斜的平面,該設計充分利用了手機圓弧流線的外形特點,為天線爭取到了最大的凈空體積,為設計目標帶寬提供了必要的天線凈空體積。這個天線綜合運用了接地干擾片耦合技術、改變參考地形狀增加天線帶寬的技術、曲流技術、多分支技術和匹配網絡等多種技術方法對天線進行優化設計。設計方式采用先用HFSS軟件對天線進行電腦仿真,再用實物進行制作,對仿真結果進行驗證。經驗證,實物設計結果與仿真結果較為一致,對以后利用該技術提高天線帶寬有切實的參考意義。利用這些技術后,這個天線不但以多頻段,寬帶寬,高效率,高增益,低剖面的技術特點達到了行業標準,而且以其成本低,易組裝的經濟實用性,實現了良好的商業價值。
[Abstract]:In this paper, a low profile broadband antenna is designed to meet the general requirement of smart phone antenna. The frequency band of antenna is GSM900M\ DCS1800M\ PCS1900M\ TD1900M\ TD2100M. Volume 53mm*8mm*3mm area 531mm 2. In order to fully meet the needs of the smart machine, the antenna height is relatively low, 2mm on the edge of the main board and 4mm on the top of the inner side of the main board, with an average height of 3 mm. The antenna adopts inclined plane in structure. The design makes full use of the shape characteristics of the mobile phone arc streamline to obtain the maximum clearance volume for the antenna and provides the necessary antenna clearance volume for the design of the target bandwidth. The antenna is optimized by various techniques, such as grounding interference chip coupling technology, changing the shape of reference ground and increasing antenna bandwidth, meandering technology, multi-branch technology and matching network, etc. Firstly, the antenna is simulated by HFSS software, and then the simulation results are verified. It is verified that the result of the design is in agreement with the simulation result, which has practical reference significance for improving the antenna bandwidth by using this technique in the future. By using these technologies, the antenna not only achieves the industry standard with the characteristics of multi-frequency band, wide band, high efficiency, high gain and low profile, but also has good commercial value because of its low cost and easy to assemble.
【學位授予單位】:華東理工大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TN929.53
【參考文獻】
相關期刊論文 前2條
1 唐偉;曾志毅;楊邦朝;;基于LTCC工藝的藍牙天線設計與制造[J];電子元件與材料;2010年11期
2 施華,舒琳,王均宏;手機天線的研究進展[J];移動通信;2002年11期
,本文編號:2052516
本文鏈接:http://sikaile.net/kejilunwen/wltx/2052516.html
最近更新
教材專著