本文選題：導航衛星 + 時頻基準�。� 參考：《復旦大學》2014年碩士論文

【摘要】：精確的導航主要依賴于精確的時間。在導航衛星系統中,精確位置的測量實際上是精確時間的測量,而精確的時間來自于精確的時頻基準信號。高精度的衛星時頻基準信號是整個衛星導航系統實現導航定位、授時和測速的基礎。研究高精度的導航時頻基準源生成技術,是各個國家基礎研究的重點方向,對國家建設和發展意義重大。本文第一部分,介紹國內外導航衛星時頻基準設備的研究發展現狀,給出相關實現方法和技術指標。并在前人研究的基礎上,梳理出下一代高性能導航定位系統時頻基準設備的技術發展趨勢。第二部分分析了時頻信號的準確度、頻率穩定度等關鍵技術指標,并給出相關指標的相互轉化關系。在此基礎上,研究基于數字鎖相環DPLL和直接數字頻率合成DDS相混合的導航高精度時頻基準源生成技術,仿真產生高精度、高穩定度、低相噪和低雜散的基準信號,并分析其性能。作為原理樣機設計的理論基礎。第三部分是根據系統的功能和指標要求,提出一種可行的高精度時頻基準源原理樣機實現方案,將銣原子鐘輸出10MHz參考信號轉換為高可靠、高精度、穩定并且連續的10.23MHz導航衛星時頻基準信號,并進行軟硬件實現。最后,針對原理樣機的關鍵技術指標,進行測試驗證,給出具體測試結果。
[Abstract]:Accurate navigation depends mainly on precise time. In the navigation satellite system, the accurate position measurement is actually the accurate time measurement, but the accurate time comes from the accurate time frequency reference signal. High precision satellite time frequency reference signal is the basis of the whole satellite navigation system to realize navigation positioning, timing and velocity measurement. The research of high-precision time-frequency reference source generation technology is the key direction of basic research in each country, and it is of great significance to national construction and development. In the first part of this paper, the research and development of navigation satellite time-frequency reference equipment at home and abroad are introduced, and the relevant implementation methods and technical specifications are given. On the basis of previous studies, the technical development trend of the next generation high performance navigation and positioning system time-frequency reference equipment is sorted out. In the second part, the key technical indexes, such as accuracy and frequency stability of time-frequency signal, are analyzed, and the relationship between relative indexes is given. On this basis, the high precision time-frequency reference source generation technology based on DPLL and DDS is studied, which can generate high precision, high stability, low phase noise and low spurious reference signal. Its performance is analyzed. As the theoretical basis of prototype design. In the third part, according to the function and index requirement of the system, a feasible prototype of time-frequency reference source with high precision is proposed. The output 10MHz reference signal of rubidium clock is converted into high reliability and high precision. Stable and continuous 10.23 MHz navigation satellite time frequency reference signal, and software and hardware implementation. Finally, the key technical indexes of the principle prototype are tested and verified, and the concrete test results are given.
【學位授予單位】：復旦大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN967.1

【參考文獻】

相關期刊論文 前5條

1 張立新,劉宇紅;GPS的時頻系統[J];空間電子技術;2000年04期

2 陳剛;;鎖相環路的相位噪聲分析[J];科技信息;2009年03期

3 劉婭;李孝輝;王文利;;基于差拍的頻標比對系統的性能比較[J];時間頻率學報;2009年01期

4 孫曉聞;張瑞永;陳國海;;直接數字頻率合成器的相位噪聲分析[J];現代雷達;2009年06期

5 秦運柏;時間頻率的高準確度測量方法[J];宇航計測技術;2002年01期

相關碩士學位論文 前4條

1 楊文可;時頻信號相位噪聲分析與辨識研究[D];國防科學技術大學;2008年

2 龔航;低相位噪聲高精度相位可控頻率合成技術研究與應用[D];國防科學技術大學;2008年

3 俞建國;星載原子鐘誤差檢測與時鐘備份[D];哈爾濱工業大學;2008年

4 李智鵬;振蕩器中的相位噪聲研究[D];電子科技大學;2010年

，

本文編號：2014898