本文選題：GMR-13G + RLC　； 參考：《北京交通大學》2014年碩士論文

【摘要】：如今新一代衛星移動通信系統多數都支持GMR-13G標準(GMR,Geostationary earth orbit Mobile Radio interface),該標準是由歐洲電信標準化研究所ETSI (European Telecommunications Standards Institute)發布的可與地面3G核心網互聯的地球同步衛星移動通信空中接口技術規范,從基于GSM (Global System for Mobile communication)標準的通信系統GMR-1演化而來。GMR-13G通信系統作為新一代衛星移動通信系統,為地面提供基于同步衛星的3G移動通信業務,而如何保證通信過程中控制信令及業務數據有效的處理并進行可靠傳輸是整個系統研究實現中需要解決的重要問題。本文關于GMR通信系統中數據傳輸處理的研究與實現就是以解決上述問題為基礎,依附于整個GMR-13G協議棧系統軟件,最終完成了系統中RLC (Radio Link Control)/MAC (Media Access Control)層協議的主體功能,即系統信令以及業務數據的傳輸處理。 本文以GMR-13G無線接入網側RLC/MAC層協議為基礎,在對協議總體有所了解之后,本人對RLC/MAC層協議進行了詳細的分析與研究,然后設計并編碼實現協議中關于數據傳輸處理的功能,從而完成了GMR通信系統對于控制信令和業務數據的可靠傳輸。其中,RLC層提供TM (Transparent Mode)、UM (Un-acknowledge Mode)、AM (Acknowledge Mode)三種數據傳輸模式,AM數據傳輸模式功能最為復雜,同時也包含其他模式主體功能的實現。因此,本文以實現AM傳輸模式為主線,對AM發送與接收模塊設計以及上下行數據傳輸流程做了詳細介紹,并重點實現下行數據的分段級聯、選擇性重傳以及上行數據重組三大功能。最后,本人在時多任務操作系統VxWorks平臺模擬測試環境,對數據處理功能的實現進行了功能性與一致性驗證。 綜合項目實際需求和實現難度方面考慮,目前GMR-13G通信系統中關于數據傳輸處理的總體設計和其中的三種傳輸模式的設計方案已經能夠符合預期的應用要求,通過和終端的聯調驗證,數據傳輸處理功能實現,終端和基站接入網之間能夠進行正常的數據通信。
[Abstract]:Today, most of the new generation of satellite mobile communication systems support the GMR-13G standard, GMR Geostation earth orbit Mobile Radio Interface, a geostationary satellite mobile link that can be interconnected with terrestrial 3G core networks issued by ETSI / European Telecommunications Standards Institute), European Institute of Telecommunications Standardization Technical specification for signal-air interface, GMR-13G communication system evolved from GMR-1, a communication system based on GSM Global System for Mobile communication) standard, as a new generation of satellite mobile communication system, which provides 3G mobile communication services based on synchronous satellites for the ground. However, how to ensure the effective processing and reliable transmission of the control signaling and service data in the communication process is an important problem to be solved in the research and implementation of the whole system. In this paper, the research and implementation of data transmission and processing in GMR communication system is based on solving the above problems, and it is attached to the whole GMR-13G protocol stack system software. Finally, the main function of the RLC Radio Link Control)/MAC Access Control layer protocol in the system is completed. Namely system signaling and service data transmission processing. This paper is based on the RLC/MAC layer protocol of GMR-13G wireless access network. After understanding the protocol, I analyze and research the RLC/MAC layer protocol in detail, then design and code the function of data transmission processing in the protocol. Thus, the reliable transmission of control signaling and service data in GMR communication system is completed. Among them, the RLC layer provides TM transparent mode / UM / Unacknowledge mode (Unacknowledge mode), which has the most complex function of AM data transmission mode, and also includes the realization of the main function of other modes. Therefore, this paper takes the realization of AM transmission mode as the main line, introduces the design of AM transmission and receiving module and the data transmission process of upstream and downlink in detail, and focuses on the realization of segment cascade of downlink and downlink data. Selective retransmission and uplink data recombination three major functions. Finally, I simulate the test environment on the VxWorks platform, and verify the function and consistency of the data processing function. Considering the actual demand and the difficulty of the project, the overall design of data transmission and processing and the design of three transmission modes in the GMR-13G communication system have been able to meet the expected application requirements. Through the connection with the terminal, the data transmission processing function is realized, and the normal data communication can be carried out between the terminal and the base station access network.
【學位授予單位】：北京交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN927.2

【參考文獻】

相關期刊論文 前10條

1 鄧亞平;付紅;謝顯中;施淵籍;張玉成;石晶林;;3GPP LTE協議棧RLC層AM傳輸模式的設計與實現[J];重慶郵電大學學報(自然科學版);2009年06期

2 房小偉;李小文;焦風鳴;;TD-LTE系統網絡端RRC連接建立過程研究[J];廣東通信技術;2011年05期

3 武紹旭;李小文;郝明華;;TD-LTE系統隨機接入過程MAC子層設計與仿真[J];光通信研究;2011年03期

4 陳發堂;朱明;;LTE系統中RLC層發送過程與接收過程的詳細研究及測試[J];廣東通信技術;2013年02期

5 祝仰偉;張紅霜;;TD-LTE系統空中接口協議棧研究[J];廣西通信技術;2010年04期

6 葉益林;徐子平;;GMR-1系統空口技術研究[J];電子質量;2012年11期

7 朱芹;屈剛;劉璐;;TD-LTE系統連接建立過程的研究與實現[J];信息技術;2013年08期

8 李貴勇;趙國會;;LTE協議棧RLC層的研究與實現[J];數字通信;2011年01期

9 王洋;劉立祥;;GEO衛星移動通信RLC層重傳機制研究[J];計算機工程與設計;2013年01期

10 李岱明;;基于Linux的LTE RLC層協議設計與實現[J];信息與電腦(理論版);2011年03期

，

本文編號：1889206