本文選題：軟件無線電 + VPX架構��； 參考：《電子科技大學》2015年碩士論文

【摘要】：軟件無線電是一種新興的無線電廣播通信技術,其核心思想是在一個通用的、標準的、模塊化的硬件平臺上用軟件來實現無線電臺的各種功能。具體實現上來講,可通過下載和更新軟件來升級頻帶信息、接口協議和功能等,通過動態加載新的波形和協議,它能夠重新編程或配置,以此來實現不同的應用。本文針對上述理論,結合當今的硬件工藝水平和數字信號處理技術,以可實現為出發點,設計了一種可重構的數字信號處理系統,該系統采用開放的VPX架構,將組成該平臺的各種組件或元素以搭積木的方式拼湊組合,通過軟件配置實現不同的應用。本平臺的核心是中頻信號處理模塊,在實際應用中以中頻信號處理主板搭載FMC子卡的方式提供支撐豐富的外圍接口,同時在模塊的設計過程中通過對I/O模塊、數據處理模塊等進行模塊化的處理,以達到可同時使用于多個項目的目的。本文主要做了以下工作:1、研究了軟件無線電、數字信號處理的基本理論,對可重構技術、VPX總線技術等進行了重點研究;2、在對可重構技術的深入理解下,設計出一種基于VPX架構的可重構高速信號處理平臺的實現方案,對其平臺組成、系統功能以及架構設計等做了詳細闡述;3、完成中頻信號處理主板的設計和實現,包括主板的設計思想、基本架構、主要器件的選型、主板的原理圖詳細設計;4、完成FMC子卡的設計和實現,包括子卡的結構要素設計、主要器件的選型、FMC子卡的原理圖設計和PCB設計;5、搭建可重構平臺,對中頻信號處理模塊和該平臺的軟件可重構性進行了測試和驗證。本文的研究工作主要基于實際項目,已經應用于各課題中。
[Abstract]:Software radio is a new radio broadcasting communication technology, its core idea is to use software to implement various functions of radio station on a universal, standard, modular hardware platform. The new waveform and protocol can be reprogrammed or configured to achieve different applications. In this paper, a reconfigurable digital signal processing system is designed based on the hardware technology level and digital signal processing technology. This system uses an open VPX architecture to form the platform. The core of this platform is the medium frequency signal processing module. In the practical application, the medium frequency signal is used to carry the FMC subcard to provide the rich peripheral interface, and the I/O module is passed in the module design process. The modules of data processing module are processed to achieve the purpose of using multiple projects at the same time. The following work is done in this paper: 1, the basic theory of software radio, digital signal processing, reconfigurable technology and VPX bus technology are studied. 2, under the deep understanding of reconfigurable technology, the design is designed. An implementation scheme of the reconfigurable high-speed signal processing platform based on VPX architecture is described in detail. 3, the design and implementation of the intermediate frequency signal processing main board are completed, including the design idea of the main board, the basic architecture, the selection of the main components, the detailed design of the main board's schematic diagram, and the complete FM. The design and implementation of the C sub card include the design of the structural elements of the sub card, the selection of the main components, the schematic design of the FMC sub card and the design of the PCB. 5, the reconfigurable platform is built to test and verify the software reconfiguration of the medium frequency signal processing module and the platform. The research work of this paper is mainly based on the actual projects and has been applied in various classes. In the question.

【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN911.7
，

本文編號：1804691