發布時間：2018-04-11 10:12

  本文選題：LTE-A + 綜測儀�。� 參考：《華中科技大學》2014年碩士論文

【摘要】：LTE-A綜測儀能實現對LTE-A終端性能特性和設計方案的全面檢測，有效提高LTE-A終端研發效率和生產質量，促進LTE-A終端技術的成熟，推動LTE-Advanced產業的發展。本文源于國家科技重大專項“TD-LTE-Advanced終端綜合測試儀表開發”，論文的主要工作包括： （1）在LTE-A綜測儀MAC層協議軟件的設計中。首先結合MAC層功能需求進行難點分析，針對各難點給出建立HARQ通道時序關系表、設計HARQ通道狀態轉換圖、獨立載波調度、零拷貝、減少使用中斷和信號量等設計思路，然后對MAC層協議軟件架構和層間接口進行設計，MAC層與RLC層、RRC層通過環形緩沖隊列交互控制信息和數據包，MAC層與PHY通過以太網接口進行信息交互，MAC層協議軟件包括MUX、HARQ、MAC控制、調度、隨機接入和MAC Common6個子模塊，分別用于實現復用/解復用、HARQ、MAC層控制元素管理、資源調度、隨機接入和高層控制消息處理，最后對每個子模塊的進行具體設計。 （2）在LTE-A綜測儀MAC層協議軟件的測試工作。首先分析了MAC層協議軟件的測試需求，包括HARQ時序測試、HARQ功能測試、復用/解復用測試、BSR測試、下行資源分配測試、隨機接入測試、MAC層集成測試和MAC與RLC聯測。然后設計一種基于VC開發環境的測試平臺，包括eNB側和UE側測試軟件，兩者的實現均采用多線程模型并通過socket進行通信，，前者通過時序包周期性喚醒后者以實現協議處理的同步。最后依次對各項測試進行了詳細設計并對具體結果進行了分析，測試結果表明MAC協議軟件各項基本功能運行正常，且具有良好的穩定性。
[Abstract]:LTE-A comprehensive measurement instrument can realize the overall detection of LTE-A terminal performance characteristics and design scheme, improve the efficiency and production quality of LTE-A terminal research and development, promote the maturity of LTE-A terminal technology and promote the development of LTE-Advanced industry.This paper originates from the national science and technology major project "TD-LTE-Advanced terminal comprehensive test instrument development". The main work of this paper includes:1) in the design of MAC layer protocol software of LTE-A comprehensive measuring instrument.Based on the analysis of the function requirements of MAC layer, this paper presents the design ideas of establishing the HARQ channel timing relation table, designing the HARQ channel state transition diagram, independent carrier scheduling, zero copy, reducing the use of interrupt and semaphore, etc.Then the design of MAC layer protocol software architecture and interlayer interface between MAC layer and RLC layer through ring buffer queue interactive control information and data packet MAC layer and PHY through Ethernet interface information exchange MAC layer protocol software including MAC control, scheduling,Random access and MAC Common6 submodules are used to implement the control element management, resource scheduling, random access and high level control message processing in the MAC layer of multiplexing / demultiplexing, respectively. Finally, the specific design of each sub-module is carried out.2) testing the MAC layer protocol software of LTE-A comprehensive tester.Firstly, the testing requirements of MAC layer protocol software are analyzed, including HARQ timing test, multiplexing / demultiplexing test, downlink resource allocation test, random access test and MAC / RLC integration test.Then a test platform based on VC development environment is designed, including eNB side and UE side test software. Both of them are implemented by multi-thread model and communicate through socket.The former rouses the latter periodically to realize the synchronization of protocol processing.Finally, each test is designed in detail and the concrete results are analyzed. The test results show that the basic functions of the MAC protocol software are running normally and have good stability.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN929.5

【相似文獻】

相關期刊論文 前10條

1 曾華q

本文編號：1735544