本文選題：寬帶無線信道仿真　切入點：MIMO　出處：《北京交通大學》2014年碩士論文

【摘要】：摘要：隨著當前移動通信系統寬帶化以及大規模MIMO通信技術成為下一代移動通信系統研究的熱點,寬帶無線信道仿真技術需求日益迫切。無線信道仿真是移動通信理論和關鍵技術研究、通信系統設計、無線網絡規劃、設備研制及工程驗收的重要工具,也是無線信道建模研究與應用之間的重要橋梁。目前,無線信道仿真主要以純軟件仿真為主,該方法實時性較差,仿真環境過于理想,無法提供與物理設備的接口；而基于硬件的無線信道仿真技術被少數國外公司壟斷,靈活性較差,難以滿足未來無線信道仿真的需求。針對這種情況,本文利用并行計算技術對基于硬件的無線信道仿真系統進行了優化設計,研制了基于半文件存儲方法的寬帶無線信道仿真儀,并通過了實驗室驗證測試。 本文主要工作及創新點包括以下幾個方面： 一、針對寬帶MIMO信道仿真,采用迭代處理、并行處理、軟硬件聯合處理等技術,提出了基于半文件存儲的信道仿真方法,有效地降低了仿真復雜度,提升了仿真速度,滿足了高速環境下高精度實時仿真的需求。 二、基于本文提出的信道仿真方法,在美國國家儀器(NI)公司的軟件無線電平臺上研制了支持兩通道獨立仿真和2×2MIMO仿真的寬帶無線信道仿真儀,滿足了當前LTE系統半實物仿真的需求。 三、搭建了LTE半實物仿真系統,對TD-LTE系統高速環境下的鏈路性能進行了仿真測試,分析了EVM、BLER以及吞吐量等性能指標,對研制的無線信道仿真儀的性能進行了驗證。
[Abstract]:Absrtact: with the current broadband mobile communication system and large-scale MIMO communication technology become the focus of the next generation of mobile communication systems, broadband wireless channel simulation technology needs more and more urgent.Wireless channel simulation is an important tool for mobile communication theory and key technology research, communication system design, wireless network planning, equipment development and engineering acceptance. It is also an important bridge between wireless channel modeling research and application.At present, the wireless channel simulation is mainly based on pure software simulation. The simulation environment is too ideal to provide the interface with physical equipment, and the hardware-based wireless channel simulation technology is monopolized by a few foreign companies.Because of its poor flexibility, it is difficult to meet the needs of future wireless channel simulation.In this paper, the hardware based wireless channel simulation system is optimized by using parallel computing technology. A wideband wireless channel simulator based on half-file storage method is developed and tested in the laboratory.The main work and innovation of this paper include the following aspects:Firstly, for broadband MIMO channel simulation, iterative processing, parallel processing, hardware / software joint processing and other techniques are used to propose a channel simulation method based on half-file storage, which effectively reduces the complexity of simulation and improves the speed of simulation.It meets the demand of high precision real-time simulation in high speed environment.Secondly, based on the channel simulation method proposed in this paper, a wideband wireless channel simulator supporting two-channel independent simulation and 2 脳 2MIMO simulation is developed on the software radio platform of National instrument Company.It meets the demand of the current LTE system hardware-in-the-loop simulation.Thirdly, the LTE hardware-in-the-loop simulation system is built, and the link performance of the TD-LTE system under the high-speed environment is tested. The performance indexes of the EVMM-BLER and the throughput are analyzed, and the performance of the developed wireless channel simulator is verified.
【學位授予單位】：北京交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN929.5

【參考文獻】

相關期刊論文 前1條

1 陳發堂;鄭曉獻;;TD-LTE系統UE端EVM測量與DSP實現[J];光通信研究;2011年06期

，

本文編號：1715502