本文選題：激光雷達　切入點：水平測量　出處：《激光與紅外》2014年08期

【摘要】：針對常規飛機水平測量方法存在的低精度、低效率及數據處理工作量大等實際問題,本文提出了一種基于激光雷達光學測量系統的水平測量方法。首先對激光雷達測量系統進行了原理分析,并基于此原理進行了相應的飛機水平測量方案設計,同時進一步深入研究了數字化水平測量的關鍵技術,包括CCD圖像處理技術及轉站測量技術。通過實際測試,各特征點的合成總誤差均小于給定的綜合誤差0.5 mm,滿足方案設計的測量精度指標要求。
[Abstract]:Aiming at the practical problems such as low precision, low efficiency and heavy data processing in the conventional aircraft horizontal measurement method, this paper presents a level measurement method based on the lidar optical measurement system.Firstly, the principle of lidar measurement system is analyzed, and the corresponding aircraft level measurement scheme is designed based on this principle. At the same time, the key technology of digital level measurement is further studied.Including CCD image processing technology and transfer station measurement technology.Through the actual test, the total error of each characteristic point is less than the given comprehensive error of 0.5 mm, which meets the requirement of the measurement precision index of the scheme design.
【作者單位】： 長春理工大學光電工程學院;長春大學電子信息工程學院;
【基金】：吉林省科技廳重大項目(No.20106010)資助
【分類號】：TN958.98

【相似文獻】

相關重要報紙文章 前1條

1 賈國忠;GPS手表[N];中國計算機報;2000年

，

本文編號：1713003