本文選題：13.56MHZ　切入點：RFID　出處：《福建師范大學》2015年碩士論文

【摘要】：近年來,天線作為RFID (Radio Frequency Identification)系統的重要組成部件,在其中發揮著關鍵的作用。天線作為射頻識別系統的空中接口,是閱讀器與應答器之間信息傳輸?shù)臉蛄?因此對RFID讀寫器天線的探究具有現實意義。RFID技術具有安全性能高、信息存儲量大等特點,被視為條形碼最有潛力的替代品。物聯網的發展更是推動了RFID技術的前進。因此RFID天線成為各大高校及企業的研究熱點。由于實際環境的制約,天線小型化一直都是研究人員所關注的重點。而且迅猛發展的無線通信對天線的小型化提出了越來越高的要求。本論文主要研究在約束條件下對13.56MHz RFID讀寫器天線的仿真和設計,對小型化讀寫器天線的高識別距離的優化進行了探究。分別研究在面積和周長限定的情況下,不同的設計參數對天線線圈性能的影響,并通過三維電磁仿真軟件HFSS和MATLAB軟件的數字圖像處理功能來對比天線的磁場強度標量圖,進而判斷天線性能的優劣。研究工作旨在找出在面積或周長限定條件下,具有較好性能的天線線圈設計參數。本文使用HFSS軟件做了大量的仿真研究,優選設計方案并實際制作天線進行驗證,實際測量情況與仿真結果相吻合,驗證了仿真設計的準確性。研究結果對RFID讀寫器天線的設計和生產具有一定的參考價值。
[Abstract]:In recent years, as an important component of RFID Radio Frequency Identification system, antenna plays a key role in it.As the air interface of RFID system, antenna is the bridge of information transmission between reader and transponder. Therefore, it is of practical significance to explore the antenna of RFID reader.It is regarded as the most potential substitute for bar code.The development of the Internet of things is to promote the progress of RFID technology.Therefore, RFID antenna has become a research hotspot in universities and enterprises.Antenna miniaturization has always been the focus of researchers due to the constraints of the actual environment.Moreover, the rapid development of wireless communication has put forward higher and higher requirements for antenna miniaturization.This paper mainly studies the simulation and design of 13.56MHz RFID reader antenna under the constraint conditions, and probes into the optimization of the high recognition distance of the miniaturized reader antenna.The effect of different design parameters on the performance of antenna coil is studied in the case of limited area and perimeter, and the magnetic field intensity scalar diagram of antenna is compared by the digital image processing function of 3D electromagnetic simulation software HFSS and MATLAB software.Then the antenna performance is judged.The purpose of this study is to find out the design parameters of antenna coil with better performance under the condition of limited area or circumference.In this paper, a large number of simulation studies have been done by using HFSS software, and the optimal design scheme has been selected and the antenna has been made for verification. The actual measurement results are in agreement with the simulation results, and the accuracy of the simulation design is verified.The research results have some reference value for the design and production of RFID reader antenna.
【學位授予單位】：福建師范大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TP391.44;TN820

【參考文獻】

相關期刊論文 前1條

1 陳劍;冀京秋;陳寶國;;我國射頻識別(RFID)技術發展戰略研究[J];科學決策;2010年01期

相關碩士學位論文 前3條

1 陳瑩;射頻識別（RFID）系統天線設計及阻抗測量方法[D];鄭州大學;2006年

2 薛松;軟件無線電羅盤技術研究[D];電子科技大學;2007年

3 賈彭軍;RFID讀寫器天線仿真研究與設計[D];北京交通大學;2013年

，

本文編號：1709626