綜采工作面機電裝備無線Mesh通信方法
本文關鍵詞: 無線Mesh 多信道 吞吐率 信號強度 出處:《重慶大學學報》2014年03期 論文類型:期刊論文
【摘要】:針對現有通信方式不能很好地適應綜采工作面機電設備動態移動的問題,提出了一種基于無線Mesh網絡的綜采工作面機電裝備通信方法。為了提高M(jìn)esh網絡帶寬資源的利用率,提出了基于雙天線和干擾感知的動態信道分配方法;設計了高吞吐率路由協議和多徑路由控制協議,對無線Mesh網絡鏈路質量進行管理;對影響Mesh網絡信號強度的因素進行分析,研究適用于綜采工作面的無線網絡節點部署方法;對無線Mesh網絡在綜采工作面的通信效果進行實驗,結果顯示,無線Mesh網絡的信號強度范圍為-41~-68dBm,數據傳輸速率為大于等于12Mbps。結果表明,無線Mesh網絡能夠滿足綜采工作面機電裝備的通信需求,為綜采工作面機電裝備的通信提供了一種新思路。
[Abstract]:Aiming at the problem that the existing communication methods can not adapt to the dynamic movement of electromechanical equipment in fully mechanized mining face, a communication method of electromechanical equipment in fully mechanized mining face based on wireless Mesh network is proposed. In order to improve the utilization ratio of Mesh network bandwidth, A dynamic channel allocation method based on dual antennas and interference sensing is proposed, a high throughput routing protocol and a multipath routing control protocol are designed to manage the link quality of wireless Mesh networks, and the factors affecting the signal intensity of Mesh networks are analyzed. The wireless network node deployment method suitable for fully mechanized mining face is studied, and the communication effect of wireless Mesh network in fully mechanized mining face is tested, the results show that, The signal intensity range of wireless Mesh network is from -41 to 68 dBm.The data transmission rate is more than or equal to 12Mbps.The results show that the wireless Mesh network can meet the communication requirements of mechanical and electrical equipment in fully mechanized mining face, and provides a new way for the communication of mechanical-electrical equipment in fully mechanized mining face.
【作者單位】: 中國礦業大學機電工程學院;
【基金】:國家高科技研究發展計劃(863)重點資助項目(2013AA06A411) 國家自然科學基金資助項目(51005231) 江蘇省青藍工程資助項目
【分類號】:TN929.5
【相似文獻】
相關期刊論文 前10條
1 陶志勇;王如龍;張錦;;基于多進程的區域間通信方法[J];計算機系統應用;2013年04期
2 楊正球,孟洛明;一種新的進程通信方法的設計[J];通信學報;1999年11期
3 吳志強;李斌;;基于電流場的水下高速數字通信方法及實現[J];傳感技術學報;2010年11期
4 唐浩坤;汪林林;;移動Agent可靠位置透明通信方法的研究[J];計算機工程;2006年15期
5 趙明鏡,喻金科,葉愛華;多通道多用途生產工藝流程控制系統中串口通信方法的實現[J];南昌航空工業學院學報(自然科學版);2004年04期
6 陸斌,盧剛;C++Builder通信方法研究[J];微機發展;2003年S1期
7 劉文霞;;基于興趣匹配的網絡優化通信方法研究[J];電子科技;2012年08期
8 王長濤;黃寬;付佳新;;基于CPS的通信方法的研究[J];科技廣場;2012年09期
9 廖旋;肖繼學;殷巧;程志;;Visual C++中串行通信方法的實時性研究[J];西華大學學報(自然科學版);2012年06期
10 王涌,肖儂,盧錫城,任浩;元計算系統中多通信方法的實現[J];計算機工程與科學;2000年06期
相關碩士學位論文 前1條
1 劉雷;車聯網安全應用通信方法研究[D];西安電子科技大學;2013年
,本文編號:1555625
本文鏈接:http://sikaile.net/kejilunwen/wltx/1555625.html