本文關鍵詞：基于CycloneⅡ的FPGA的復雜調制信號源的設計與實現　出處：《蘭州交通大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 調制信號源 軟件無線電 直接數字頻率合成 FPGA

【摘要】：在日趨發達的無線通信技術中，，通信的安全與可靠也越來越成為人們關注的焦點。無線通信壓制系統的研發為信息安全的傳遞提供了有力保障。而通信壓制系統中能夠產生帶寬可調、性能更好噪聲調頻壓制信號則是重中之重，因此對無線通信壓制系統專用調制信號源的開發與研制就顯得格外緊迫。 本論文來源于無線通信壓制系統項目，針對基于Cyclone II的FPGA的復雜調制信號源的設計與實現進行研究。提出了一種基于FPGA+QDUC硬件平臺的系統構架，運用信號調制與信號處理算法，通過直接數字頻率合成技術實現的復雜調制信號源系統設計方案。首先，本文介紹了系統設計的相關理論基礎：軟件無線電理論及設計思想、頻率合成技術、信號調制算法。其次，對CORDIC算法與DA算法的基本原理進行了闡述。再次，對基于Cyclone II的FPGA的復雜調制信號源的整體設計方案、系統核心模塊的設計方案以及核心芯片的功能特性進行重點闡述。接著，從系統的可靠與穩定性出發，提出低成本、低功耗的解決方案，運用時分復用思想實現多信號的時分輸出。系統設計采用了模塊化思想，各個模塊實現相應的功能，由主控芯片F(xiàn)PGA對其進行時序與邏輯控制，在FPGA中實現了對數字正交上變頻芯片的控制、信號存儲模塊芯片的控制以及單頻信號的生成，AM、FM等模擬調制方式的實現，2ASK、GMSK等數字調制方式的實現。最后，整合系統需求進行了硬件與軟件的設計調試，并對復雜調制信號源實際產生的信號進行了驗證，并提出進一步完善系統的方法。 本設計產生的調制信號經過實際測試與檢驗，擁有較好雜散抑制特性和很高的頻率精度，運用到無線通信壓制系統中達到了預期的目標與效果，滿足了系統對中頻調制信號精度的要求。
[Abstract]:In the increasingly developed wireless communication technology. The research and development of wireless communication suppression system provides a powerful guarantee for the transmission of information security, and the bandwidth can be adjusted in the communication suppression system. Better performance of noise FM suppression signal is the most important, so the development and development of special modulation signal source for wireless communication suppression system is particularly urgent. This paper comes from the wireless communication suppression system project. The design and implementation of complex modulation signal source based on FPGA based on Cyclone II is studied. A system architecture based on FPGA QDUC hardware platform is proposed. Using signal modulation and signal processing algorithm, the design scheme of complex modulation signal source system is realized by direct digital frequency synthesis technology. First of all. This paper introduces the theoretical basis of the system design: software radio theory and design ideas, frequency synthesis technology, signal modulation algorithm. Secondly. The basic principles of CORDIC algorithm and DA algorithm are described. Thirdly, the design of complex modulation signal source based on Cyclone II FPGA is presented. The design of the system core module and the functional characteristics of the core chip are described. Then, from the system reliability and stability, a low cost and low power solution is proposed. Time division multiplexing is used to realize the multi-signal time division output. The system design adopts the modularization idea, each module realizes the corresponding function, the main control chip FPGA carries on the timing and the logic control to it. The control of digital quadrature up-conversion chip, the control of signal storage module and the realization of analog modulation such as single frequency signal generation are realized in FPGA. Finally, the hardware and software of the integrated system are designed and debugged, and the signal generated by the complex modulation signal source is verified. The method of further perfecting the system is put forward. The modulation signal produced by this design has good spurious suppression characteristics and high frequency precision after actual test and verification. It is applied to wireless communication suppression system to achieve the desired goal and effect. The system meets the requirement of if modulation signal precision.
【學位授予單位】：蘭州交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN911.3

【參考文獻】

相關期刊論文 前2條

1 李林;;利用DA算法實現大規模FIR濾波器[J];實驗科學與技術;2006年02期

2 葛澎;;FPGA時鐘設計[J];現代電子技術;2011年11期

本文編號：1426951