本文關鍵詞：物聯網智能家居家庭網關系統設計與實現　出處：《長安大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 物聯網 智能家居 家庭網關 ZigBee S3C6410

【摘要】：隨著經濟的發展，人們生活水平的提高，人們對家居生活的便捷性與舒適性也提出了更高的要求；而近幾年來物聯網技術的迅猛發展，家居智能化也得到了很大的進步。智能家居系統，作為物聯網技術的重要應用，成為目前國內外研究的熱點。本文在充分研究物聯網技術與智能家居系統架構的基礎上，通過對比目前國內外主流智能家居系統的特點，提出了一套智能家居系統方案，并對其核心設備——家庭網關進行了設計與實現。 在本文中，綜合了嵌入式技術、計算機網絡技術以及無線傳感網絡技術，對智能家居的家庭網關系統分模塊進行了設計與實現，本次設計中主要分為三個模塊：ZigBee組網模塊、協議轉換模塊、遠程通信模塊。ZigBee組網模塊采用了TI公司的CC2530來保證硬件實現，該模塊作為整個ZigBee網絡的協調器，管理ZigBee網絡，并且基于Z-stack協議棧開發了ZigBee組網的程序。協議轉換模塊采用了S3C6410模塊并搭載必要外圍電路來保證硬件實現，運行嵌入式Linux系統，并基于該環境以及Qtopia平臺設計并實現了協議轉換程序。遠程通信模塊主要實現了家庭網關對Internet的連接功能以及DHCP穿透的轉發服務器程序設計與實現。 最后，在完成家庭網關系統的設計與實現后，，編寫了家庭內部組網測試程序，完成了對家庭網關的ZigBee組網、協議轉換、遠程通信三大功能模塊的測試。測試結果表明，本次設計的家庭網關系統滿足系統設計要求，達到預期設計目標，具有很好的實用價值。
[Abstract]:With the development of economy, people's living standards improve, people convenience and comfort of life Home Furnishing also put forward higher requirements; and in recent years the rapid development of networking technology, intelligent Home Furnishing has made great progress. Home Furnishing intelligent system, as an important application of networking technology, become the research focus at home and abroad. Based on the research of complex network technology and intelligent Home Furnishing system architecture, through comparing the current domestic and international mainstream intelligent Home Furnishing system characteristics, put forward a set of intelligent Home Furnishing system, and the core equipment of home gateway is designed and implemented.
In this paper, the embedded technology, computer network technology and wireless sensor network technology, the system of intelligent home gateway Home Furnishing points on the design and Realization of the module, this design is mainly divided into three modules: ZigBee network module, protocol conversion module, remote communication module of.ZigBee network module by TI company CC2530 to ensure that the hardware implementation, the module as the coordinator of the ZigBee network, ZigBee network management, and Z-stack protocol stack development program based on the ZigBee network. The protocol conversion module using the S3C6410 module and equipped with the necessary peripheral circuit to ensure hardware, embedded Linux operation system, and based on the environment and the Qtopia platform design and implementation the protocol conversion program. The remote communication module mainly realizes the home gateway connection to Internet function and DHCP through forwarding server Design and implementation.
Finally, the completion of the design and implementation of the home gateway system, write the family internal network testing procedures, completed the ZigBee network, the home gateway protocol conversion, remote communication functions of the three modules of the test. The test results show that the design of the home gateway system to meet the design requirements of the system, to achieve the desired design goals, has a good practical value.

【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP391.44;TN915.05

【參考文獻】

相關期刊論文 前4條

1 孫紅;許濤;王穎慧;張磊磊;;ZigBee網絡的RFID技術在物聯網中的研究[J];微計算機信息;2011年06期

2 徐健;楊珊珊;;基于CC2530的ZigBee協調器節點設計[J];物聯網技術;2012年05期

3 R. VIDHYAPRIYA;P. T. VANATHI;;Reliable energy-efficient routing with novel route update in wireless sensor networks[J];Journal of Zhejiang University(Science A:An International Applied Physics & Engineering Journal);2008年08期

4 花鐵森;;智能家居系統核心技術探討[J];智能建筑電氣技術;2009年01期

本文編號：1393135