As a core part of subsea production systems, subsea control modules（SCMs） are costly, difficult, and expensive to install and inconvenient to use in underwater maintenance. Therefore, performance and function tests must be carried out before launching SCMs. This study developed a testing device and an SCM test by investigating SCMs and their underwater. The testing device includes four parts: a hydraulic station, an SCM test stand, a signal generating device, and an electronic test unit. First, ... 

【文章來源】：Journal of Marine Science and Application. 2020,19(03)CSCD

【文章頁數】：12 頁

【文章目錄】：
1 Introduction
2 General Layout of Subsea Control Module Test System
    2.1 Components of Subsea Control Module
        2.1.1 Hydraulic Power Unit
        2.1.2 SCM Test Stand
        2.1.3 Signal Generating Device
        2.1.4 Electronic Test Unit
    2.2 Test Requirements for Components of Subsea Control Module
        2.2.1 Hydraulic Power Unit
        2.2.2 SCM Test Stand
        2.2.3 SGDs
        2.2.4 ETU
3 General Layout of Subsea Control Module Test System
    3.1 Design of Hydraulic Station
        3.1.1 Redundant Power Unit
        3.1.2 Redundant Oil Supply Unit
        3.1.3 Redundant Filter Unit
        3.1.4 Emergency Shutdown Pressure Relief Unit
    3.2 Design of Test Stand
    3.3 Design of SGD
    3.4 Design of ETU
4 SCM Test
5 Conclusion


【參考文獻】：
期刊論文
[1]番禺34-1氣田水下生產系統(tǒng)ESD0級關斷測試研究[J]. 陳加鑫,郝高正,韓磊,王釗.  機電工程技術. 2018(11)
[2]水下油氣生產系統(tǒng)水下測試設施研究[J]. 蘇鋒,陳斌,張凡,周凱,劉冬冬.  中國測試. 2015(07)
[3]Compliance of hydraulic system and its applications in thrust system design of shield tunneling machine[J]. SHI Hu,GONG GuoFang,YANG HuaYong,MEI XueSong.  Science China（Technological Sciences）. 2013(09)
[4]Design and Research on the Two-Joint Mating System of Underwater Vehicle[J]. 張忠林,王立權.  China Ocean Engineering. 2013(01)
[5]水下生產系統(tǒng)測試技術綜述[J]. 梁稷,姚寶恒,曲有杰,段立志,石錦坤.  中國測試. 2012(01)
[6]Output speed and flow of double-acting double-stator multi-pumps and multi-motors[J]. Tetsuhiro TSUKIJI.  Journal of Zhejiang University-Science A（Applied Physics & Engineering）. 2011(04)



本文編號：3527458