【摘要】：隨著遼河油區勘探開發的發展,向深層尋找油氣發現成為趨勢,雙南區塊成為一個新的勘探開發重點。由于雙南區塊地層復雜,隨著探井鉆井深度的增加,鉆井難度不斷增大,如深部地層機械鉆速慢、防斜打直矛盾突出、泥巖井壁穩定性差、井下高溫影響鉆井液性能和工具壽命、井控風險大等,對安全快速鉆井施工提出了新的挑戰。本文主要針對雙南區塊深探井施工中存在的困難和技術瓶頸展開研究,與現場施工實際相結合,實驗了防斜打直技術、高效鉆頭優選技術、高壓噴射鉆井技術、雙擺提速鉆具+PDC復合鉆進技術等,并取得了初步成果,對今后遼河油區深井鉆井提速具有借鑒意義。
文內圖片：
圖片說明：鐘擺鉆具組合形式
[Abstract]:With the development of exploration and development in Liaohe oil area, it has become a trend to find oil and gas in deep layer, and Shuangnan block has become a new focus of exploration and development. Because of the complex formation of Shuangnan block, with the increase of drilling depth, the difficulty of drilling is increasing, such as the slow drilling speed of deep formation machinery, the prominent contradiction of anti-oblique straightening, the poor stability of mudstone wellbore, the influence of downhole high temperature on drilling fluid performance and tool life, and the great risk of well control, which poses new challenges to safe and rapid drilling construction. In this paper, the difficulties and technical bottlenecks existing in the construction of deep exploration wells in Shuangnan block are studied, combined with the field construction practice, the anti-oblique straightening technology, the high efficiency bit optimization technology, the high pressure jet drilling technology, the double pendulum speed-raising drilling tool PDC composite drilling technology and so on are tested, and the preliminary results are obtained, which can be used for reference for the future deep well drilling speed increase in Liaohe oil area.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE245

【參考文獻】

相關期刊論文 前3條

1 解蘭宏;張金成;張東清;臧艷彬;;渦輪鉆井技術在元壩等重點區塊的應用[J];石油鉆探技術;2011年06期

2 張玉勝,陳平;偏軸鉆具防斜效果探討[J];天然氣工業;2004年12期

3 彭敬國;胡大梁;羅飛;;導向渦輪鉆具在元壩陸相定向井鉆井中的應用[J];石油機械;2013年12期

，

本文編號：2511534