發布時間：2019-06-21 08:33

【摘要】：采用CFD模擬和BP神經網絡結合的方法,對BIPTCFU-III型氣旋浮裝置主體設備氣旋浮罐的入口管徑、環形縫隙寬度、高徑比和穩流筒直徑等主要結構參數進行了優化,研究了結構參數對分離效率的影響.結果表明,優化后氣旋浮罐分離效率從81.07%提升至92.82%,預測值與模擬值的偏差僅為1.15%;增大穩流筒直徑、提高高徑比、增大入口管徑和減小環形縫隙寬度有利于強化油水兩相的運移和分離過程,提高分離效率.
[Abstract]:The main structural parameters such as the inlet pipe diameter, the annular gap width, the high-diameter ratio and the diameter of the steady-flow tube were optimized by using the method of CFD simulation and BP neural network, and the effect of the structural parameters on the separation efficiency was studied. The results show that the separation efficiency of the post-cyclone floating tank is increased from 81.07% to 92.82%, the deviation between the predicted value and the simulated value is only 1.15%, the diameter of the steady flow cylinder is increased, the high-diameter ratio is increased, the inlet pipe diameter and the width of the annular gap are increased, and the migration and separation process of the oil-water two-phase is facilitated. And the separation efficiency is improved.
【作者單位】： 北京化工大學機電工程學院;北京石油化工學院機械工程學院;
【基金】：北京市屬高等學�！伴L(zhǎng)城學者”培養計劃資助項目(編號:CIT&TCD20150317) 北京市自然科學基金資助項目(編號:KZ201410017019)
【分類號】：X741

【相似文獻】

相關期刊論文 前1條

1 宋賢生;劉全楨;宮宏;秦汝祥;戴廣龍;;大型罐區油氣擴散規律的CFD數值模擬研究[J];中國安全生產科學技術;2008年02期

相關碩士學位論文 前1條

1 劉照東;噴管流場水力空化的CFD數值模擬[D];東北石油大學;2011年

，

本文編號：2503936