【摘要】：為了定量獲取注采井間連通及擴容信息,以風城油田SAGD擠液預處理啟動為例,采用有限元軟件ABAQUS計算擴容過程中儲層變形及滲流特性,通過監測壓力,結合德雷克-普拉格力學本構模型,按照比值定義法、權重思想和乘法原則建立了擴容過程中的水力連通模型,依靠數據分析中回歸方法得出了擴容半徑的計算公式。結果表明,風城SAGD超稠油儲層的水力連通系數為0.6~0.8,系數越大,擴容區域越大,后期預熱蒸汽用量越少。模型預測與實際監測數據吻合效果好,相對誤差小于5%,說明建立的水力連通模型是有效的。
[Abstract]:In order to quantitatively obtain the information of connectivity and capacity expansion between injection and production wells, taking the start-up of SAGD extrusion pretreatment in Fengcheng Oilfield as an example, the finite element software ABAQUS is used to calculate the reservoir deformation and seepage characteristics in the process of capacity expansion, and the pressure is monitored. According to the ratio definition method, the weight idea and the multiplication principle, the hydraulic connectivity model in the process of capacity expansion is established according to the Drake-Prager mechanical constitutive model, and the formula for calculating the expansion radius is obtained by using the regression method in the data analysis. The results show that the hydraulic connectivity coefficient of Fengcheng SAGD super heavy oil reservoir is 0.6 鈮，

本文編號：2480493