生物接觸氧化法處理煉油廢堿液
發布時間:2019-05-16 07:53
【摘要】:采用生物接觸氧化工藝對煉油廢堿液進行生化處理。結果表明,當進水COD濃度2 000~3 000 mg/L、硫化物濃度30~150 mg/L、揮發酚濃度0~4.5 mg/L時,維持系統水力停留時間48 h,可實現出水COD濃度、硫化物濃度和揮發酚濃度分別為70~300 mg/L、0~5.6 mg/L和1.0 mg/L,去除率分別為80%~97%,94%~100%和98%~99%。當生化系統受到污染負荷沖擊時,COD和硫化物處理能力3 d后能恢復正常。
[Abstract]:The biological contact oxidation process was used to treat the waste lye in oil refining. The results show that when the influent COD concentration is 2000 鈮,
本文編號:2478133
[Abstract]:The biological contact oxidation process was used to treat the waste lye in oil refining. The results show that when the influent COD concentration is 2000 鈮,
本文編號:2478133
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/2478133.html
最近更新
教材專著