【摘要】：建立24罐8層火道順流式罐式爐溫度場、殘余揮發分濃度場的二維數學模型,模型中包含多孔介質滲流傳熱模型、固相活塞流模型、異相熱解反應動力學模型及等效熱流密度邊界模型4個部分,并通過該模型研究罐式爐中石油焦熱解傳質傳熱過程。結果表明:在給定工況下,石油焦揮發分熱解反應主要在二至五層火道高度對應的料罐內進行;在六至八層火道高度對應的料罐內,形成長度約為2.0 m的高溫煅燒帶(T1423 K),滿足石油焦進一步聚合并實現碳結構重排的煅燒溫度要求。經生產數據對比驗證表明:該模型基本能夠反映爐內溫度的分布情況,可為罐式爐的溫度自動化調控提供一定的理論依據。
[Abstract]:A two-dimensional mathematical model of temperature field and residual volatile concentration field in a 24-tank 8-layer furnace is established. The model includes porous media seepage heat transfer model and solid-phase piston flow model, and the two-dimensional mathematical model includes porous medium seepage heat transfer model and solid-phase piston flow model. The kinetic model of heterogeneous pyrolysis reaction and the boundary model of equivalent heat flux were used to study the pyrolysis and heat transfer process of petroleum coke in tank furnace. The results show that the volatile pyrolysis of petroleum coke is mainly carried out in the tank corresponding to the height of two to five layers of fire channel under a given working condition. A high temperature calcined zone (T1423 K),) with a length of about 2.0m was formed in the tank corresponding to the height of the six to eight layers. The calcination temperature requirement of further polymerization of petroleum coke and realization of rearrangement of carbon structure was met. The comparison of the production data shows that the model can basically reflect the temperature distribution in the furnace and can provide a certain theoretical basis for the automatic control of the temperature of the tank furnace.
【作者單位】： 中南大學冶金與環境學院;中南大學難冶有色金屬資源高效利用國家工程實驗室;
【基金】：國家自然科學基金資助項目(51374253;51574289;61533020) 中南大學“創新驅動計劃”資助項目(2015CXS017)~~
【分類號】：TE626.87;TF351

【相似文獻】

相關期刊論文 前10條

1 王平甫;羅英濤;宮振;李慶義;譚芝運;賈魯寧;于易如;;中國豎罐式爐煅燒石油焦技術分析與研討[J];炭素技術;2009年05期

2 毛斌;許建華;王存富;;罐式煅燒爐運行中幾個常見問題的探討[J];甘肅冶金;2008年02期

3 王平甫;羅英濤;宮振;李慶義;譚芝運;賈魯寧;于易如;;中國豎罐式爐煅燒石油焦技術分析與研討[J];炭素技術;2009年04期

4 劉建祥;任林;;罐式爐與回轉窯碳質燒損的探討[J];甘肅冶金;2014年02期

5 王名聲;;罐式煅燒爐熱工特性與節能[J];炭素技術;1984年02期

6 施承教,孫傳杰;不停爐更換罐式爐水套[J];輕金屬;1998年08期

7 張忠霞;;罐式爐煅燒技術[J];工業加熱;2011年04期

8 王名聲;罐式煅燒爐熱工特性與節能[J];冶金能源;1984年04期

9 王名聲;;不外加燃料八層火道罐式煅燒爐設計與實踐[J];輕金屬;1990年02期

10 李強;趙玉軍;賈友劍;;高爐罐式爐頂齒輪箱故障分析及改進措施[J];山東冶金;2010年04期

相關會議論文 前1條

1 劉建祥;任林;;罐式爐與回轉窯碳質燒損的探討[A];第十五屆中國科協年會第15分會場：全國鋁冶金技術研討會論文集[C];2013年

，

本文編號：2452739