【摘要】：本文利用聚結濾芯過濾性能的檢測裝置,通過濾材層數的梯度增加,研究了不同潤濕性聚結濾芯內部液體分布特性,分析了濾材層數、濾材潤濕性對飽和度、壓降的影響。結果表明:隨著濾芯層數的增多,親油型濾材飽和度呈"凹形"分布的趨勢愈加明顯,即親油型濾材第一層飽和度數值相同,中間層飽和度逐漸降低,最后一層飽和度又達到一致水平;而疏油型濾材飽和度曲線重合度很好,無明顯變化。隨著濾芯層數的增多,親油型濾材與疏油型濾材的總體壓降趨勢均沒有改變,但親油型濾材潤濕壓降呈下降趨勢,而疏油型濾材潤濕壓降沒有明顯變化趨勢。
[Abstract]:In this paper, the liquid distribution characteristics of different wettable coalescence filter elements are studied by increasing the gradient of filter layer, and the effects of filter layer number and filter wettability on saturation and pressure drop are analyzed. The results show that with the increase of the number of filter core layers, the distribution trend of oil-lipophilic filter material saturation is more obvious, that is, the first layer saturation value is the same, and the middle layer saturation decreases gradually. The final layer saturation reached the same level again; However, the saturation curve of oil thinning filter material has good coincidence and has no obvious change. With the increase of the number of filter core layers, the overall pressure drop of oil-lipophilic filter material and oil-sparking filter material has not changed, but the wetting pressure drop of oil-lipophilic filter material has a downward trend, while the wetting pressure drop of oil-free filter material has no obvious change trend.
【作者單位】： 中國石油大學(北京)過程流體過濾與分離技術北京市重點實驗室;
【基金】：國家自然科學基金資助項目(No.51376196)
【分類號】：TE832
，

本文編號：2403442