【摘要】：為了提高外加厚油管加厚端質量、減少缺陷的產生,以加厚Φ73.02 mm×5.51 mm油管為例,分析了油管外加厚端外表面凸棱、結疤、管端飛邊、內表面凹坑等缺陷產生的原因,并給出了相應的預防措施,主要有調整加熱溫度、改善潤滑冷卻效果、保證鋼管送料位置等措施,可減少內表面凹坑和外表面結疤等缺陷的出現;根據加厚縮短量計算公式計算出理論縮短量,進而確定沖頭行程,能有效減少端面凹槽、內凹坑缺陷的產生。
[Abstract]:In order to improve the quality of thickened tubing and reduce the production of defects, taking the thickened 桅 73.02 mm 脳 5.51 mm tubing as an example, the causes of the defects such as convex edges, scarring, flying edges at the end of the tubing and pits on the inner surface are analyzed. The corresponding preventive measures are given, such as adjusting the heating temperature, improving the lubricating and cooling effect, ensuring the feeding position of the steel pipe, and so on, which can reduce the appearance of the inner surface pit and the outer surface scar and so on. The theoretical shortening is calculated according to the formula of thickening shortening, and then the stroke of punching head is determined, which can effectively reduce the appearance of the defects in the end groove and the inner pit.
【作者單位】： 寶雞石油鋼管有限責任公司西安石油專用管分公司;
【分類號】：TE931.2

【相似文獻】

相關期刊論文 前4條

1 崔奮;張德松;王國正;張朋舉;劉延成;賈美玲;;外加厚油管一次成形技術應用分析[J];石油礦場機械;2010年11期

2 商偉;中原油田胡109井砂卡3″外加厚油管事故處理工藝[J];內蒙古石油化工;2005年03期

3 張廣路;楊鵬;韓軍;;φ89mmAPI外加厚油管接頭上扣扭矩實驗研究[J];鉆采工藝;2012年01期

4 ;[J];;年期

相關重要報紙文章 前1條

1 特約記者 魏世華邋記者 羅建東;“吐哈制造”叫響市場[N];中國石油報;2007年

，

本文編號：2377904