魚骨刺柔性管在碳酸鹽巖縫洞型油藏應用的數值模擬研究
[Abstract]:When acid fracturing is put into production in horizontal wells of carbonate fracture-cavity reservoirs in Tahe Oilfield, there are some problems, such as the general acid-fracturing effect is not ideal, the acid fracturing in sections is difficult, the tool selection is difficult, the fracture strike is difficult to control, and so on. In this paper, numerical simulation method is used to analyze the effect of increasing production and economy of horizontal wells in carbonate fractured and cavernous reservoirs when they are completed with fishbone spiny flexible tube. The results show that the oil production of single well increases with the increase of the number of fish bone piercing flexible tube devices when the fish bone spiny flexible tube is not connected with the effective fracture cavity body, but the average oil increment of the single set of devices increases first and then decreases. In the wells with low probability of connected fractures and cavities, it is suggested that six or ten sets of fish bone piercing flexible tube devices should be used for completion operations. When a single effective fracture cavity body is connected, the oil production increases with the increase of the volume of the fracture cavity body, and when multiple fractures and cavities are connected and the total volume of the fractures and cavities is the same, the oil production increases with the increase of the volume of the fractures and cavities. The accumulative oil production increases with the increase of the number of connected fractures and cavities, and better economic benefits can be obtained by connecting more than one jointed cavity body. The results show that the fishbone spiny flexible tube can be used for the completion of horizontal wells in carbonate fracture-cavernous reservoirs in Tahe Oilfield.
【作者單位】: 中國石化石油工程技術研究院;頁巖油氣富集機理與有效開發國家重點實驗室;中國石化西北油田分公司工程技術研究院;
【基金】:中國石化科技攻關項目“自適應調流控水完井技術推廣及工業化應用”(編號:P16117)資助
【分類號】:TE257
【參考文獻】
相關期刊論文 前10條
1 王洋;袁清蕓;李立;;塔河油田碳酸鹽巖儲層自生酸深穿透酸壓技術[J];石油鉆探技術;2016年05期
2 張雄;耿宇迪;焦克波;侯帆;羅攀登;;塔河油田碳酸鹽巖油藏水平井暫堵分段酸壓技術[J];石油鉆探技術;2016年04期
3 李紅凱;康志江;;碳酸鹽巖縫洞型油藏溶蝕孔洞分類建模[J];特種油氣藏;2015年05期
4 符幸子;徐守余;王淑萍;丁烽娟;;塔河油田六區碳酸鹽巖溶洞型儲集體三維地質建模[J];斷塊油氣田;2015年04期
5 呂海濤;丁勇;耿鋒;;塔里木盆地奧陶系油氣成藏規律與勘探方向[J];石油與天然氣地質;2014年06期
6 李弘;竇之林;王世星;唐金良;朱童;;碳酸鹽巖縫洞型儲層“弱反射”特征的地震多屬性識別[J];石油物探;2014年06期
7 曹陽;陳琛;史雪枝;熊昕東;喬智國;;川西致密氣藏裸眼水平井分段壓裂技術[J];石油鉆探技術;2012年03期
8 賈光亮;張飛洲;梁護站;;塔河油田超大規模復合酸壓技術[J];石油鉆探技術;2011年06期
9 肖暉;郭建春;曾俊;;縫洞型碳酸鹽巖儲層水平井分段酸壓技術研究[J];斷塊油氣田;2011年01期
10 吳忠寶;南北杰;王改娥;;低滲透油藏大型整體壓裂數值模擬——以鄂爾多斯盆地靖安油田五里灣一區為例[J];油氣地質與采收率;2006年06期
【共引文獻】
相關期刊論文 前10條
1 張寧縣;蔣明;鄧強;王濤;劉劍輝;鄭鋒年;;三塘湖條湖組致密油水平井分段壓裂技術應用[J];西部探礦工程;2017年08期
2 賈光亮;蔣新立;李曄e,
本文編號:2251100
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/2251100.html