遼河油田大位移井鉆井液技術研究
[Abstract]:Based on the analysis and study of drilling site construction data in Bijialing block, this paper finds out the regularity of drilling in this block and the main technical difficulties in drilling construction, and puts forward "reducing friction / preventing blocking by using lubricant material". Turbulent well washing and other means to achieve the purpose of borehole purification "technical ideas." The well drilling fluid formula developed in laboratory has good lubricity, chip carrying performance, good rheology and temperature resistance. According to the proposed technical ideas, emulsifier, lubricant and other treatment agents were screened, and the range of each treatment agent was determined, and the drilling fluid system of the extended reach well was preliminarily established. Combined with the existing techniques in the field, the formation of wellbore purification technology, such as turbulent rock carrying, turbulent descaling, MTV, lubrication and anti-blocking technology, is improved. The drilling fluid of extended reach well has been applied in Xinggu 7-H224 well and Jialing 607-3-11 well, which has obtained good lubrication and hole cleaning effect, and solved the technical problem of large-reach well in Liaohe Oilfield. It lays a good foundation for the popularization and application of this system in long-reach well drilling. The well is washed by turbulent flow on site, and the operation is smooth, and there is no serious overload of friction torque. The drilling fluid system has good lubricating, anti-blocking and carrying capacity, and the effect is remarkable. The technical measures of on-site construction are scientific and reasonable, and have strong operability. It is one of the drilling fluid systems suitable for the extended reach wells in Liaohe Oilfield. It has broad application value.
【學位授予單位】:東北石油大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:TE254
【相似文獻】
相關期刊論文 前10條
1 ;大位移井鉆采工藝技術[J];石油科技論壇;2008年02期
2 槐慶林;王洪英;;大位移井延伸極限預測技術研究[J];西部探礦工程;2008年07期
3 陳勛;;擺線型大位移井軌道設計的數值計算[J];探礦工程(巖土鉆掘工程);2010年06期
4 ;我國陸上斜深最深大位移井完鉆[J];石油鉆探技術;2000年03期
5 王世艷,王軍;大位移井采油技術現狀及發展前景[J];油氣地質與采收率;2001年05期
6 鄭傳奎;覃成錦;高德利;;大位移井減阻工具合理安放位置研究[J];天然氣工業;2007年03期
7 張林強;;大位移井摩阻扭矩計算模型[J];斷塊油氣田;2008年02期
8 郭曉樂;汪志明;;南海流花超大位移井水力延伸極限研究[J];石油鉆采工藝;2009年01期
9 石藝;;長城鉆探首口大位移井獲高產[J];石油鉆采工藝;2011年01期
10 王君書;;大位移井下套管工藝技術[J];科學之友;2011年04期
相關會議論文 前1條
1 郭曉樂;汪志明;;大位移井巖屑運移規律研究[A];第二十屆全國水動力學研討會文集[C];2007年
相關重要報紙文章 前7條
1 張光明 王小勇;南海大位移井從航道下抽油[N];中國能源報;2013年
2 李俊穎 蘇延福;大位移井:“橫行”地宮探油氣[N];中國石化報;2011年
3 唐海雄邋魏宏安;近海高水垂比大位移鉆井項目實現規模應用[N];科技日報;2007年
4 特約記者 王祥 通訊員 楊景中 馬海云;大位移井鉆井技術連續獲得突破[N];中國石油報;2012年
5 楊紅軍;尹慶軍;中原油田最大位移井完鉆[N];中國石化報;2003年
6 記者 董旭霞 特約記者 張靜;長城鉆探首口大位移井獲高產[N];中國石油報;2011年
7 通訊員 羅永華邋岳曉紅;埕海油田莊海8Nm—H3井井眼水垂比達到3.66[N];中國石油報;2008年
相關博士學位論文 前2條
1 劉維凱;大位移井鉆柱力學分析及延伸能力研究[D];大慶石油學院;2008年
2 姜偉;大位移井鉆井技術在渤海油田中的應用[D];西南石油學院;2002年
相關碩士學位論文 前10條
1 梁成亮;大位移井剖面優選[D];西安石油大學;2010年
2 逯璽;遼河油田大位移井鉆井液技術研究[D];東北石油大學;2015年
3 谷玉堂;大位移井軌跡設計方法優選研究[D];大慶石油學院;2008年
4 羅成;大位移井技術在古巴地區的研究與應用[D];東北石油大學;2014年
5 金紅生;大位移井鉆井關鍵技術研究[D];西安石油大學;2014年
6 羅強;大位移井水力凈化研究[D];長江大學;2014年
7 張忠旭;大位移井水泥漿實驗方法及配方研究[D];西南石油大學;2014年
8 向明;大位移井技術研究在冀東油田的應用[D];東北石油大學;2015年
9 韓春杰;大位移井鉆柱振動規律及其應用[D];大慶石油學院;2004年
10 李錦紅;大位移井測試管柱力學分析及軟件開發[D];天津大學;2005年
,本文編號:2138482
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/2138482.html