【摘要】：遼河油田存在厚度達150m的巨厚超稠油油藏,應用SAGD技術開發取得了巨大的成就。目前,遼河油田的SAGD水平井完井管柱采用的主要是Φ177.8mm篩管,由于尺寸的限制,在一定程度上制約了油井產量的提高。為了進一步提高采油速度和最終采收率,使油田得到更加高效的開發,首次提出并實施了Φ244.5mm生產篩管鉆完井工藝,與常規Φ177.8mm篩管相比較,其過流面積增加了58%。通過大尺寸井眼SAGD水平井井身結構設計、井眼軌道設計與軌跡控制、鉆井液設計、完井管柱安全順利下入等技術研究,實現了Φ244.5mm篩管完井的目的�，F(xiàn)場應用3井次,單井日產油147t,日產水平是常規井的3倍。實踐表明,大尺寸井眼SAGD水平井鉆完井技術在開發超稠油油藏方面展現了良好的應用前景。
[Abstract]:There is a huge thick super heavy oil reservoir with a thickness of 150m in Liaohe Oilfield, which has made great achievements by using SAGD technology. At present, the main of the completion pipe column of the SAGD horizontal well in Liaohe Oilfield is the SAGD sieve tube. Due to the limitation of size, the production of oil well is restricted to a certain extent. In order to further improve the oil recovery speed and finally, the oil production speed and final result are further improved. The recovery has made the oil field more efficient, and first proposed and implemented the drilling and completion technology of the 244.5mm production sieve tube. Compared with the conventional 177.8mm sieve tube, the overflow area increased by 58%. through the design of the well body structure of the SAGD horizontal well, the trajectory design and trajectory control of the well, the design of the drilling fluid, and the safety and smooth of the completion pipe column. Down in technology research has realized the completion of the well completion of the 244.5mm sieve tube. 3 wells are used in the field, the daily oil production of a single well is 147t, and the daily production level is 3 times that of the conventional well. The practice shows that the SAGD horizontal well drilling and completion technology in large size wells shows a good application prospect in developing super heavy oil reservoirs.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TE257

【參考文獻】

相關期刊論文 前10條

1 尹志成;;杜84塊館陶組超稠油油藏SAGD高產井培育關鍵技術[J];中外能源;2015年01期

2 章敬;易燦;張龍;馬立君;;SAGD雙水平井入靶控制技術[J];石油鉆采工藝;2013年06期

3 周明;夏維;周玉霞;吳杰;吳捷;賀超;;SAGD水平井井眼軌道優化設計方法[J];河南科技;2013年15期

4 胥豪;董志輝;;長水平段水平井井眼軌道優化設計方法[J];探礦工程(巖土鉆掘工程);2013年03期

5 顧永福;;聚磺鉆井液技術在WASIT油田應用[J];中國石油和化工標準與質量;2012年04期

6 曾勇;鄭雙進;吳俊成;劉存鵬;胡靖;胡可能;程萬;;井身結構優化設計研究[J];長江大學學報(自然科學版);2011年09期

7 崔海林;曹樹生;楊春旭;唐洪林;孫連坡;;DP19小井眼欠平衡水平井井眼軌跡控制技術[J];石油鉆采工藝;2010年03期

8 周延軍;賈江鴻;李真祥;于承朋;;復雜深探井井身結構設計方法及應用研究[J];石油機械;2010年04期

9 王薇;張海;任劍;高嘉喜;張剛;;地層壓力的預測方法綜述[J];內蒙古石油化工;2010年05期

10 楊曉東;戴華林;孫立瑛;;割縫篩管抗擠壓強度綜合因素有限元分析[J];石油鉆采工藝;2009年05期

相關碩士學位論文 前1條

1 王亮;抗高溫聚磺鉆井液體系研究[D];東北石油大學;2015年

，

本文編號：2133379