本文選題：水熱法 + 模板劑　； 參考：《化學研究與應用》2017年11期

【摘要】：采用葡萄糖為模板劑,通過水熱法合成了ZnO空心球,用等體積浸漬法在氧化鋅空心球上負載金屬Ni,制成脫硫催化劑。通過X射線衍射(XRD),N_2吸附-脫附(BET),掃描電鏡(SEM)等方法對催化劑進行了表征;并以正庚烷-噻吩為模型化合物,考察了其脫硫性能。結果表明氧化鋅空心球具有較大的比表面積和孔體積,有利于汽油中含硫化合物的擴散和吸附。在反應溫度320℃、壓力1.0 MPa、進料體積空速為6h~(-1)、氫氣與模擬油體積比為60的條件下,脫硫率可高達95.5%,擁有很大的工業應用價值。
[Abstract]:ZnO hollow spheres were synthesized by hydrothermal method using glucose as template. Metal Ni was loaded on zinc oxide hollow spheres by equal volume impregnation to prepare desulfurization catalyst. The catalyst was characterized by X-ray diffraction (XRD), adsorption-desorption (BET) and scanning electron microscopy (SEM), and its desulfurization performance was investigated with n-heptane-thiophene as model compound. The results show that zinc oxide hollow spheres have a large specific surface area and pore volume, which is conducive to the diffusion and adsorption of sulfur compounds in gasoline. When the reaction temperature is 320 鈩，

本文編號：2090884