本文選題：二類油層 + 聚驅開發��； 參考：《吉林大學》2015年碩士論文

【摘要】：本文依據聚驅開發理論以及聚驅實踐經驗,同時將石油地質理論、測井理論及三維構造建模和儲層精細描述技術進行綜合應用,并針對薩南油田二類油層聚驅層系的組合以及開發方式進行了系統的科學研究。為了使二類油層提高采收率,在研究過程中針對薩南油田南三區、南四-八區二類油層河道砂發育規模明顯變小,小層數目多,單層厚度漸薄、滲透率降低等儲層特點,首先經過對精細地質的全面再研究,深化了儲層的發育特征認識,掌握油層厚度分布狀況以及非均質性,進一步落實剩余油的分布。其次,建立了研究區二類油層的選層標準,綜合考慮層系組合的多種影響因素,對研究區域的聚驅上返二類油層的層系組合問題上進行了深入的研究,對上返層系厚度及注采井距進行了確認,落實二類油層開發潛力。最后,在基于取心井的滲透率數據統計分析和室內聚驅試驗的前提下,依據對油層連通性評價與儲量控制程度分析,確定了不同分子量聚合物與油層空氣滲透率的匹配關系,優化了現有注入方式及段塞,確保了聚驅開發效益最大化,實現了產量有效接替,為今后采用聚驅開發技術形成了可靠的技術支撐。
[Abstract]:Based on the development theory of polymer flooding and the practical experience of polymer flooding, the petroleum geology theory, logging theory, 3D structural modeling and reservoir fine description technology are applied in this paper. A systematic and scientific study on the combination and development mode of the secondary reservoir polymer flooding system in Sanan Oilfield is carried out. In order to improve the recovery factor of the second class oil reservoir, in the course of the study, in view of the reservoir characteristics such as the sand development scale of the second class oil reservoir in the South 3 area and the South 4-8 area of the South fourth to eighth area is obviously smaller, the number of the small layers is more, the thickness of the single layer is thinning, and the permeability is decreasing, etc. Firstly, through the comprehensive study of fine geology, it deepens the understanding of reservoir development characteristics, grasps the distribution of reservoir thickness and heterogeneity, and further implements the distribution of remaining oil. Secondly, the layer selection standard of the second class oil layer in the study area is established, and considering the various factors affecting the formation combination, the problem of the formation combination of the second kind of oil layer in the study area is deeply studied. The thickness and injection-production spacing of upper back layer system are confirmed and the development potential of the second class reservoir is realized. Finally, based on the statistical analysis of permeability data of coring wells and laboratory polymer flooding test, according to the evaluation of reservoir connectivity and the analysis of reserve control degree, the matching relationship between different molecular weight polymers and reservoir air permeability is determined. The existing injection mode and slug are optimized to ensure the maximum benefit of polymer flooding development and the effective replacement of production is realized. The reliable technical support is formed for the adoption of polymer flooding development technology in the future.
【學位授予單位】：吉林大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE357

【參考文獻】

相關期刊論文 前10條

1 劉平;;薩中開發區特高含水期井網調整與優化技術[J];石油天然氣學報;2011年05期

2 任宏冰;;高含水期油藏剩余油分布及挖潛對策[J];內蒙古石油化工;2010年09期

3 程杰成;;“十五”期間大慶油田三次采油技術的進步與下步攻關方向[J];大慶石油地質與開發;2006年01期

4 楊靜波,耿長喜,左鐵秋,邱玉娥;薩南油田南四區東部剩余油分布特征認識[J];大慶石油地質與開發;2005年S1期

5 李陽,曹剛;勝利油田低滲透砂巖油藏開發技術[J];石油勘探與開發;2005年01期

6 王德民,程杰成,吳軍政,王剛;聚合物驅油技術在大慶油田的應用[J];石油學報;2005年01期

7 牛金剛;大慶油田聚合物驅提高采收率技術的實踐與認識[J];大慶石油地質與開發;2004年05期

8 宋考平,楊二龍,王錦梅,隋新光;聚合物驅提高驅油效率機理及驅油效果分析[J];石油學報;2004年03期

9 廖廣志,牛金剛,邵振波,陳鵬;大慶油田工業化聚合物驅效果及主要做法[J];大慶石油地質與開發;2004年01期

10 邵振波,李潔;大慶油田二類油層注聚對象的確定及層系組合研究[J];大慶石油地質與開發;2004年01期

相關碩士學位論文 前1條

1 張皓;大慶薩南油田南四區東部三類油層聚驅研究[D];浙江大學;2010年

，

本文編號：1962719