扶余油田廢棄井層封固技術研究
本文選題:水泥漿封固 + 封堵參數。 參考:《東北石油大學》2015年碩士論文
【摘要】:扶余油田作為吉林地區最早開發的油田,當前注采老井問題嚴重,廢棄井大多已多年停產不用,在油田開發過程中易產生不良影響。這些報廢井需要水泥封井,如果封固不好會導致層間串通,影響后期注水開發效果,后果嚴重的情況甚至本井或臨井會發生套返,短時間內難以及時治理,導致大面積污染。并且,注水井在廢棄井點形成二次分配,導致有效注水效率降低,無效水循環問題嚴重。為此,需要運用優化廢棄井井下作業方案設計的方法,進行不同井況類型永久廢棄封井工藝技術。本項目對扶余油田中區儲層物性特征進行研究,通過室內實驗對水泥漿型號和配方進行優選,得出封固水泥漿性能與工藝參數優選。最后通過掃描電子顯微鏡對3塊扶余油田天然巖心進行掃描觀察,分析封固前后巖心的微觀結構,確定水泥漿封固速凝時間。
[Abstract]:As the earliest oilfield developed in Jilin area, Fuyu Oilfield has serious problems in the old wells of injection and production at present, and most of the abandoned wells have stopped production for many years, which is easy to produce adverse effects in the course of oilfield development. These abandoned wells need cement sealing wells. If the cementing is not good, it will lead to interlayer collusion, which will affect the effect of water injection in the later stage. If the consequences are serious, even the wells or adjacent wells will return, it will be difficult to deal with them in time, resulting in a large area of pollution. Moreover, the secondary distribution of water injection wells at the abandoned well point leads to the reduction of effective water injection efficiency and the serious problem of ineffective water circulation. Therefore, it is necessary to use the method of optimizing the downhole operation scheme design of abandoned wells to carry out the technology of permanent abandoned well sealing with different types of well conditions. This project studies the physical properties of reservoir in the middle area of Fuyu Oilfield, and optimizes the type and formula of cement slurry through laboratory experiments, and obtains the optimum selection of performance and technological parameters of cement slurry. Finally, the scanning electron microscope was used to scan and observe the natural cores in three Fuyu oil fields, and the microstructure of the cores before and after sealing was analyzed, and the cementing time of the cement slurry was determined.
【學位授予單位】:東北石油大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:TE25
【相似文獻】
相關期刊論文 前10條
1 孫超;王軍;劉成雙;閆晶波;;扶余油田廢棄井處置技術研究與應用[J];特種油氣藏;2011年04期
2 翁玉武;孫銳艷;石少敏;王亞林;潘番;;扶余油田調整改造優化簡化工藝技術研究與應用[J];石油規劃設計;2008年02期
3 關良;張風銳;劉玉新;胡剛;譚寧;;扶余油田直井蒸汽吞吐試驗研究[J];企業科技與發展;2008年16期
4 林沖;鄭博;陳存玉;;扶余油田套返井治理技術研究與現場應用[J];科技與企業;2012年23期
5 莊淑蘭;洛躍雄;;扶余油田水驅轉注蒸汽驅提高采收率試驗研究[J];長江大學學報(自然科學版)理工卷;2009年02期
6 何增軍;林燕萍;李桂娟;張莉;王鑫;;利用淺層大平臺鉆井技術挖潛扶余油田壓覆區儲量——以城平12區塊為例[J];特種油氣藏;2012年03期
7 李占峰;;扶余油田攻克砂埋油層難題[J];石油鉆采工藝;2013年02期
8 汪嘉聯;;扶余油田西區分層監測技術及其在開發中的應用[J];油氣井測試;1991年04期
9 鐘顯彪;王嵐嵐;趙世新;李興科;;扶余油田二次開發體系實施效果[J];石油學報;2009年05期
10 汪洪;;優勢通道識別技術在扶余油田的應用[J];中國石油和化工標準與質量;2011年04期
相關會議論文 前2條
1 魏兆勝;張恩龍;代春明;;扶余油田試井壓力解釋方法評價與改進[A];“加入WTO和科學技術與吉林經濟發展——機遇·挑戰·責任”吉林省第二屆科學技術學術年會論文集(上)[C];2002年
2 周宇;;扶余油田T91區塊蒸汽驅效果分析及策略[A];創新驅動,加快戰略性新興產業發展——吉林省第七屆科學技術學術年會論文集(上)[C];2012年
相關重要報紙文章 前9條
1 高文華 通訊員 劉洪旭;扶余油田整體調改項目成為中國石油樣板[N];中國石油報;2007年
2 記者 穆廣田 通訊員 張樹偉 劉小寶;扶余油田城區改造啟動[N];中國石油報;2007年
3 記者 高文華邋特約記者 米金余 王剛;三次采油助扶余油田煥發青春[N];中國石油報;2007年
4 記者 許春發邋特約記者 于鴻升 趙海霞;扶余油田二次開發年產百萬噸在望[N];中國石油報;2007年
5 彭小勤 通訊員 潘鳳杰;扶余油田調改項目緊鑼密鼓[N];中國石油報;2004年
6 記者 穆廣田 通訊員 張樹偉 劉小寶;調改投入資金3年全部收回[N];中國石油報;2007年
7 記者 穆廣田 通訊員 王華晶;浴火重生換新顏[N];中國石油報;2006年
8 本報記者 李延平 通訊員 段艷秋;讓每個管理鏈條都高效運行[N];中國石油報;2011年
9 本報記者 穆廣田;“六精”之花遍陽春[N];中國石油報;2011年
相關博士學位論文 前1條
1 盧玉峰;扶余油田高含水期改善開發效果技術研究[D];東北石油大學;2015年
相關碩士學位論文 前10條
1 魯寧;扶余油田類稠油開發技術試驗研究[D];東北石油大學;2015年
2 單劍峰;扶余油田二次開發地面工藝研究[D];東北石油大學;2015年
3 潘兆光;扶余油田二次開發穩產技術對策研究[D];東北石油大學;2015年
4 郝大偉;扶余油田西區西7-3區塊測井精細解釋研究[D];東北石油大學;2015年
5 魏士超;扶余油田西二區塊剩余油分布規律及細分層注水實踐[D];東北石油大學;2015年
6 計雪雷;扶余油田深入地質認識及水驅影響因素研究[D];東北石油大學;2015年
7 李旭東;扶余油田取芯資料分析與砂體構型精細化分析[D];東北石油大學;2015年
8 陳存玉;扶余油田廢棄井層封固技術研究[D];東北石油大學;2015年
9 王重;扶余油田廢氣井封固技術數值模擬[D];東北石油大學;2015年
10 馬祥朝;扶余油田熱力采油提高采收率技術研究[D];大慶石油學院;2009年
,本文編號:1867456
本文鏈接:http://sikaile.net/kejilunwen/shiyounenyuanlunwen/1867456.html