本文選題：薄壁油井管 + 軸向載荷　； 參考：《西安石油大學》2015年碩士論文

【摘要】：油管、套管等油井管在井下會受到軸向壓力、外壓、內壓等載荷的作用。軸向壓力一方面會使油井管產生軸向屈曲,另一方面會改變油井管(尤其是薄壁油井管)的橫向屈曲性能(抗擠毀強度)。為此,本文運用圓柱殼體屈曲理論,將薄壁油井管作為圓柱殼體模型,推導了軸向壓力和外壓聯合作用下薄壁油井管的屈曲方程,為薄壁油井管在軸向載荷及不同邊界約束條件作用下軸向屈曲性能和橫向屈曲性能(包括橫向屈曲構型和抗擠毀強度)的分析提供了基礎。以薄壁油井管屈曲方程為基礎,分別將薄壁油井管作為兩端簡支、一端固支一端自由以及兩端固支的圓柱殼體,選取圓柱殼體屈曲的饒度曲線試解函數,并代入簡化的Donnell八階微分方程,將所得方程化為臨界應力的表達式,并通過求極小值的方法求得了軸向壓力和外壓聯合作用下薄壁油井管軸向屈曲的臨界載荷和橫向屈曲的構型與橫向屈曲臨界載荷(抗擠毀強度)。最后,通過對圓柱殼體沿橫截面圓周方向屈曲的正弦半波數m和圓柱殼體沿軸線方向屈曲的正弦半波數”取不同的值,討論兩端簡支、一端固支一端自由、兩端固支的薄壁油井管的橫向屈曲形狀。
[Abstract]:Tubing, casing and other oil well pipes are subjected to axial pressure, external pressure and internal pressure. Axial pressure will cause axial buckling of oil well tube on the one hand, and change lateral buckling performance of oil well pipe (especially thin-wall oil well tube) on the other hand. In this paper, the buckling equation of thin-walled oil well tubing under the combined action of axial pressure and external pressure is derived by using the buckling theory of cylindrical shell and taking the thin-walled oil well tube as the cylindrical shell model. It provides a basis for the analysis of axial buckling and lateral buckling (including transverse buckling configuration and compressive strength) of thin-walled oil well pipes under axial loads and different boundary constraints. Based on the buckling equation of thin-walled oil well tube, the thin-walled oil well tube is used as the cylindrical shell with simple support at both ends, free at one end and free support at both ends, respectively, and the test solution function of the buckling curve of cylindrical shell is selected. The simplified Donnell eighth order differential equation is replaced, and the obtained equation is transformed into the expression of critical stress. The critical load of axial buckling, the configuration of transverse buckling and the critical load of lateral buckling (compressive strength) of thin-walled oil well pipes under combined axial pressure and external pressure are obtained by the method of minimization. Finally, by taking different values of sinusoidal half-wave number m of cylindrical shell buckling along the circumferential direction of cross section and sinusoidal half-wave number of cylindrical shell buckling along axial direction, it is discussed that the two ends are simply supported, one end is fixed and one end is free. The transverse buckling shape of thin-walled oil well pipes fixed at both ends.
【學位授予單位】：西安石油大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TE931.2

【參考文獻】

相關期刊論文 前8條

1 李子豐，馬興瑞，黃文虎;水平管中受壓扭細長圓桿（管）的幾何非線性彎曲[J];力學與實踐;1994年03期

2 吳連元;劉鋼;;圓柱殼在軸向壓力和環向外壓作用下的彈塑性屈曲[J];上海交通大學學報;1987年05期

3 劉健;林鐵軍;練章華;楊斌;王延民;;考慮殘余應變的連續油管螺旋屈曲載荷新公式[J];石油機械;2008年01期

4 高國華,張福祥,王宇,呂國志;水平井眼中管柱的屈曲和分叉[J];石油學報;2001年01期

5 高國華，李琪，李淑芳;管柱在水平井眼中的屈曲分析[J];石油學報;1996年03期

6 祝恩淳,P.Mandal,C.R.Calladine;軸壓圓柱薄殼的屈曲分析[J];土木工程學報;2001年03期

7 高國華，李琪，，張健仁;管柱在垂直井眼中的屈曲分析[J];西安石油學院學報(自然科學版);1996年01期

8 高國華，李琪，李淑芳;彎曲井眼中受壓管柱的屈曲分析[J];應用力學學報;1996年01期

相關博士學位論文 前2條

1 冷繼先;井下管柱屈曲行為的理論與實驗研究[D];西南石油學院;2003年

2 褚洪杰;彈性圓柱殼動力和熱屈曲中的辛方法[D];大連理工大學;2009年

本文編號：1866018