本文選題：凍膠 + 高溫高鹽�。� 參考：《斷塊油氣田》2017年06期

【摘要】：針對常規堵劑耐溫耐鹽性能差,而難以滿足高溫高鹽油藏控水進一步提高采收率的問題,研發了一種耐溫耐鹽(97℃,197.35 g/L)的延緩凍膠體系。該體系由耐溫耐鹽非離子聚丙烯酰胺PAM、有機交聯劑HDAME組成,目標油藏條件下,優化的凍膠體系配方為(0.40%~0.50%)PAM+(0.12%~0.20%)HD+(0.12%~0.20%)AME,成膠時間在24~60 h。室內物理模擬實驗表明,耐溫耐鹽延緩凍膠體系具有較好的剖面改善能力,采收率增值達到34.6百分點。采用環境掃描電鏡(ESEM)和差示掃描量熱儀(DSC)探究了凍膠的微觀結構和耐溫耐鹽性能,并從凍膠的交聯機理、微觀結構闡明了其耐溫耐鹽特性。
[Abstract]:Aiming at the problem that the conventional plugging agent has poor temperature and salt tolerance, but it is difficult to meet the problem of water control in high-temperature and high-salt reservoirs to further improve the recovery factor, a retarded gel system with temperature and salt tolerance of 97 鈩，

本文編號：1846781