本文選題：井口系統 + 密封總成�。� 參考：《一重技術》2016年05期

【摘要】：采用Inventor軟件建立海底井口系統密封總成的三維模型,將模型導入到Abaqus有限元計算軟件中,對密封總成下放過程進行計算,分析其在工作過程中的彈塑性性能,最終得到密封總成在下放過程中受力及變形情況,為實際工作提供參考。
[Abstract]:The 3D model of sealant assembly of submarine wellhead system is established by using Inventor software. The model is introduced into Abaqus finite element calculation software to calculate the process of sealing assembly down, and its elastic-plastic performance is analyzed in the working process. Finally, the stress and deformation of the sealing assembly in the process of decentralization are obtained, which provides a reference for practical work.
【作者單位】： 一重集團大連工程技術公司;
【分類號】：TE95
，

本文編號：1836465